# Analyze nearby Wi-Fi networks and channels

> See nearby Wi-Fi networks with signal, channel, band, and security in S.A.K. Utility, and spot crowded channels. Needs a Wi-Fi adapter.

Source: https://sakutility.com/wiki/analyze-wifi
Applies to: S.A.K. Utility (SAK), a free portable Windows toolkit
Updated: 2026-11-01

To see nearby Wi-Fi networks and how crowded each channel is, use S.A.K. Utility: go to the **Network Management** tab, open **Network Diagnostics**, choose **Wi-Fi**, and press **Scan Wi-Fi**. The table lists each network with its signal, channel, band, security, and vendor.

## When to use this

- Wi-Fi is slow or keeps dropping, and you suspect interference from neighbors.
- You want to compare signal strength in different rooms.
- You are choosing which channel to set on your router.

## What you need

A PC with a Wi-Fi adapter. Without one, the status bar shows **Wi-Fi hardware not available**. No administrator rights are requested.

## Steps

1. Go to the **Network Management** tab and open **Network Diagnostics**.
2. Choose the **Wi-Fi** tab.
3. Press **Scan Wi-Fi** for one reading, or **Continuous Scan** to keep the list updating as you walk around. Press **Stop** to end a continuous scan.
4. Read the table. Click a column heading to sort by it.

![Wi-Fi tab with the Scan Wi-Fi, Continuous Scan, and Stop buttons above an empty table with columns for SSID, BSSID, Signal, Quality, Channel, Band, Security, and Vendor](https://sakutility.com/screenshots/wiki/net_wifi_empty.webp?v=94ce707add)

*The Wi-Fi tab before a scan*

## How it works

S.A.K. Utility asks Windows what the Wi-Fi adapter can hear. It only listens. It does not join any network, and it does not read saved passwords.

Each column means:

- **SSID**: the network's name. Your current network is in bold, with a star after its name.
- **BSSID**: the unique ID of one access point. One network can have several.
- **Signal**: strength in dBm, a negative number where closer to zero is stronger. S.A.K. Utility shows -50 or better in green, down to -70 in orange, and weaker than that in red.
- **Quality**: the same strength as a percentage.
- **Channel** and **Band**: the slice of radio space in use.
- **Security**: the protection the network uses.
- **Vendor**: the likely maker of the access point.

Below the table, a line sums up each channel, such as `Ch 6: 3 networks, avg -62 dBm`. Many strong networks on your channel can slow you down, so a quieter channel may help. You change the channel on the router itself, not in S.A.K. Utility.

## Good to know

- If you see **Wi-Fi scan failed**, the Wi-Fi radio may be off, or the PC has no wireless adapter. Turn Wi-Fi on and try again.
- **Wi-Fi scan results may be stale** means the adapter did not confirm a fresh scan, so the list may be slightly old.
- Right-click a row to copy the name, BSSID, signal, or channel, or choose **Export to CSV...**. An export holds the names of nearby networks, so check it before you share it.
- To share or save the networks this PC already knows, see the Wi-Fi Manager guide below.

## Related guides

- [Make a Wi-Fi QR code and share Wi-Fi with a phone](https://sakutility.com/wiki/wifi-qr-codes)
- [Test internet and LAN speed between two PCs](https://sakutility.com/wiki/test-network-speed)
- [Run ping, traceroute, and MTR on Windows](https://sakutility.com/wiki/ping-traceroute-mtr)
