# Audit Windows Firewall rules for conflicts and gaps

> List every Windows Firewall rule, and see conflicts and coverage gaps, with the read-only Full Audit tool in S.A.K. Utility.

Source: https://sakutility.com/wiki/audit-firewall-rules
Applies to: S.A.K. Utility (SAK), a free portable Windows toolkit
Updated: 2026-11-01

To audit Windows Firewall rules, use S.A.K. Utility: go to the **Network Management** tab, open **Network Diagnostics**, choose **Firewall**, and press **Full Audit**. You get every rule in one table, along with lists of rules that conflict and common protection gaps. The audit only reads. It does not change a rule.

## When to use this

- A program is blocked, and you want to find the rule behind it.
- You took over a PC, and want to know what it allows in.
- You want a quick review before handing a PC back.

## What you need

Nothing special. The tool does not ask for administrator rights. It looks at Windows Firewall only, so another security product's firewall will not appear.

## Steps

1. Go to the **Network Management** tab and open **Network Diagnostics**.
2. Choose the **Firewall** tab.
3. Press **Full Audit**. A line beside the filters gives the totals, such as `400 rules | 2 conflicts | 3 gaps`.
4. Narrow the table if you need to. Type in **Search rules...** to match a rule name, port, or application. Use the lists beside it to show **All Directions**, **Inbound**, or **Outbound**, and **All Actions**, **Allow**, or **Block**.
5. Read **Conflicts** and **Coverage Gaps** under the table.

![Firewall tab after Full Audit, with a table of rules, search and filter controls, and Conflicts and Coverage Gaps boxes below](https://sakutility.com/screenshots/wiki/net_firewall_audit.webp?v=2e75edc5cc)

*Full Audit lists the rules, then the conflicts and gaps*

The table shows **Enabled**, **Name**, **Direction**, **Action**, **Protocol**, **Local Ports**, **Remote Ports**, and **Application**.

## How it works

S.A.K. Utility reads the rules from Windows and compares them with each other.

**Conflicts** are rules that may work against each other. Each one is marked `[CRITICAL]`, `[WARNING]`, or `[INFO]`.

**Coverage Gaps** are common settings worth a second look, each with a recommendation:

- Remote Desktop (port 3389) open to all addresses.
- File sharing (SMB, port 445) allowed on the Public network profile.
- Several rules that allow all ports with no program named.
- No explicit block rules for ping-style traffic (ICMP).
- Many block rules that are turned off.

## Good to know

- A finding is a reason to review, not proof of a fault. Some are normal on a particular PC. Check what a rule is for before you change it.
- S.A.K. Utility cannot edit, add, or delete firewall rules here. Make changes in Windows Defender Firewall.
- **Reset Network** on the **Network Adapters** tab resets the whole firewall to its defaults. It is not the same as fixing one rule.
- Right-click a rule to copy its name, application, ports, or full details, or choose **Export to CSV...** to keep a record.

## Related guides

- [Scan a PC for open ports on Windows](https://sakutility.com/wiki/scan-open-ports)
- [See active network connections and shared folders](https://sakutility.com/wiki/view-connections-and-shares)
- [Reset Winsock and TCP/IP on Windows](https://sakutility.com/wiki/reset-network)
