# Read Mac and Linux disks on Windows

> Browse APFS, HFS+, and ext4 disks on Windows and copy files off them with S.A.K. Utility, with no driver, no mounting, and nothing written to the disk.

Source: https://sakutility.com/wiki/browse-mac-and-linux-disks
Applies to: S.A.K. Utility (SAK), a free portable Windows toolkit
Updated: 2026-11-15

To read a Mac or Linux disk on Windows without installing a driver, use Partition Manager in S.A.K. Utility: open the **Partition Manager** tab, press **Scan Disks**, select the partition, and click **Browse Non-Windows File System**. It lists folders on APFS, HFS+, HFSX, ext2, ext3, and ext4 partitions, and copies files to Windows. Browsing writes nothing to the disk.

## When to use this

- You have a drive from a Mac or a Linux PC and need files from it on a Windows PC.
- You want to know what a partition holds before you reuse it.

S.A.K. does not give the disk a drive letter, and it does not appear in Windows File Explorer here. You work inside these windows.

## What you need

- The disk connected to the PC.
- Administrator rights to read it. Press **Run as Admin** in the status bar first, because Windows only lets administrators read a partition directly. Without them, browsing stops with a message that begins **Unable to open**.
- Somewhere on Windows to save the files.

## Steps

### Browse and copy files

1. Press **Scan Disks**. Check the **File System** column to find your partition.
2. Select the partition and click **Browse Non-Windows File System**.
3. Leave **Target:** as it is. Leave **Path:** as `/` to start at the top, or type a folder such as `/Users/sample`. Press **Browse**.

   ![The Browse Non-Windows File System window with Target and Path boxes and a Browse button](https://sakutility.com/screenshots/wiki/partition_manager_browse_request.webp?v=c3e804c96a)

*Type the folder you want to list*

4. Read the list. The columns depend on the file system. All of them show the name, type, size, and path.

   ![The Browse ext4 File System window listing sample files with type, size, inode, and path, and buttons to copy, extract, and export](https://sakutility.com/screenshots/wiki/partition_manager_browse_ext.webp?v=3e93b1330c)

*Browsing an ext4 partition*

5. To copy one file, select it and press **Extract Selected**.
6. To copy the folder you are viewing and what is inside it, press **Export Directory** and choose a destination.
7. To save the list as text, press **Copy Listing**.
8. Press **Close**. To view another folder, click **Browse Non-Windows File System** again and type its path. Double-clicking a folder does not open it.

HFS+ and HFSX add **Extract Resource Fork** and **Extract Attribute** for the extra data Mac files can carry.

![The Browse HFS+ File System window with data size, resource size, and catalog ID columns, and extra extract buttons](https://sakutility.com/screenshots/wiki/partition_manager_browse_hfs.webp?v=02560170f4)

*Browsing an HFS+ partition*

![The Browse APFS File System window with the volume name above a list of sample files, and buttons to copy, extract, and export](https://sakutility.com/screenshots/wiki/partition_manager_browse_apfs.webp?v=606957535b)

*Browsing an APFS partition*

### See what a partition is

Select the partition and click **Inspect Non-Windows File System**. This shows what the last disk scan learned: the file system, its details, and what S.A.K. can do with it. It also works for XFS, Btrfs, and Linux swap. **Copy Details** copies the list.

![The Inspect ext4 File System window listing the disk, partition, raw target path, file system, how it was detected, and read-only metadata, with more rows further down](https://sakutility.com/screenshots/wiki/partition_manager_inspect.webp?v=9284d3e5c1)

*Inspect shows what the last scan found*

### Check a partition for errors

1. Select the partition and click **Check Non-Windows File System**.
2. If a **Mode:** list appears, choose one. Check **Target path:**, and press the button. It reads **Check Now** for a check, which runs at once, and **Add to Queue** for a repair:

   - **Read-only check now** runs a bundled checker on ext or HFS+. When it ends, a window titled **Check Non-Windows File System** says what it found, such as **The ext4 file system: No errors found (read-only e2fsck).** Turn on the **Log** switch for the checker's own report.
   - **Original HFS+ catalog check now** runs S.A.K.'s own read-only check of an HFS+ folder structure and shows the counts. Its **Result** row reads **No errors found (read-only catalog check)** when the structure is sound.
   - **Queue ext repair**, **Queue HFS+ repair**, and **Queue generated APFS repair** add a repair to the queue, and need the confirmation box checked. They write to the disk when you press **Apply**.

3. On XFS and Btrfs, and on an APFS container S.A.K. cannot repair, no list appears. You see the results from the last disk scan instead, in a window titled with the file system's name, such as **XFS Metadata (Last Disk Scan)**. Its **Result** row reads **No errors found (read-only, in the metadata the last disk scan read)** when nothing is wrong. **Refresh Disks** recomputes them. For APFS, a **Repair** row says why no repair is offered.

![The Check Non-Windows File System window with a Mode list, a Target path box, and a repair confirmation](https://sakutility.com/screenshots/wiki/partition_manager_check_non_windows.webp?v=9f084ac55b)

*Run a read-only check now, or queue a repair for Apply*

![A properties window titled XFS Metadata (Last Disk Scan), with a Result row reading No errors found (read-only, in the metadata the last disk scan read) and a Findings row](https://sakutility.com/screenshots/wiki/partition_manager_metadata_check.webp?v=1f26adfeaa)

*For some file systems, the check shows results from the last scan*

![The APFS Metadata (Last Disk Scan) window, with a Repair row saying S.A.K. can repair only APFS containers it formatted itself, up to 128.0 MB, and that this 1.00 GB container gets only the read-only metadata check](https://sakutility.com/screenshots/wiki/partition_manager_metadata_check_apfs.webp?v=4eef881ee5)

*For APFS, the Repair row says why no repair is offered*

### APFS Container

1. Select an APFS partition and click **APFS Container**.
2. Set **Action:** to **Create snapshot**, **Delete snapshot**, **Revert to snapshot**, or **Resize container to fill partition**.
3. For a snapshot action, enter **Name:**.
4. Check the confirmation box and press **Add to Queue**. This writes to the disk when you press **Apply**.

![The APFS Container window with an Action list, a Name box, and a confirmation checkbox](https://sakutility.com/screenshots/wiki/partition_manager_apfs_container.webp?v=a0637a0f99)

*APFS Container actions wait for Apply*

S.A.K. Utility can create, change, rename and delete files and folders on APFS containers created by macOS, on a raw partition or disk image, through a crash-safe in-place copy-on-write engine. Separately, on earlier code (June to August 2026), S.A.K.'s HFS+ and APFS write engine was validated with Apple's own tools. It refuses Fusion and multi-device containers, sealed system volumes, case-sensitive volumes, and encrypted volumes without their password or recovery key.

## How it works

S.A.K. has its own code for reading these file systems, so Windows needs no driver and nothing is mounted. It reads the partition directly, in read-only mode, works out the folder structure, and copies the bytes you ask for.

To change a Mac or Linux disk, use the queue like any other Partition Manager change. You can [format a partition](https://sakutility.com/wiki/create-delete-format-partition) as ext, HFS+, APFS, or Linux swap, [resize](https://sakutility.com/wiki/resize-or-move-partition) ext partitions, and grow APFS partitions.

## Good to know

> **Back up first if you change anything.** Browsing, inspecting, and read-only checks do not write to the disk. Repairs and **APFS Container** actions do, and they cannot be undone. Separately, on earlier code (June to August 2026), S.A.K.'s HFS+ and APFS write engine was validated with Apple's own tools. Back up before changing a disk.

- **Encrypted disks cannot be read here.** The browse window has no place for a password, so a FileVault volume stops with **APFS volume is encrypted; a password or recovery key is required**. Encrypted ext volumes are not supported either.
- **XFS and Btrfs are detect-only.** S.A.K. recognizes them and shows their details, but cannot list their files. S.A.K. Utility includes no XFS or Btrfs tools, so it cannot format, repair, or deep-check them either; it runs only its own read-only metadata check. Linux swap holds no files to browse.
- **Some ext volumes are refused** if they use less common features such as compression, inline data, or bigalloc. The message names the feature.
- **Size limits.** A listing shows up to 1,000 entries per folder. **Extract Selected** handles a file up to 512 MB. **Export Directory** handles up to 10,000 entries and 4 GB in total.
- **APFS repair is limited.** **Queue generated APFS repair** appears only for a container S.A.K. formatted itself, up to 128.0 MB. Any other APFS container gets the read-only metadata check, and the window says why. It starts **S.A.K. can repair only APFS containers it formatted itself, up to 128.0 MB.**, then gives the reason, such as **This container was formatted by something else (a Mac, for example), so only the read-only metadata check is offered.**
- **Repairs are refused** on system, boot, EFI, MSR, recovery, and read-only partitions.

## Related guides

- [Create, delete, or format a partition](https://sakutility.com/wiki/create-delete-format-partition)
- [Resize or move a partition](https://sakutility.com/wiki/resize-or-move-partition)
- [Partition Manager basics](https://sakutility.com/wiki/partition-manager-basics)
- [Run S.A.K. Utility as administrator](https://sakutility.com/wiki/administrator-rights)
