# Convert dynamic disk, file system, or cluster size

> Convert a dynamic disk to basic, FAT32 to NTFS, or primary to logical, or change a volume's cluster size or serial number with S.A.K. Utility on Windows.

Source: https://sakutility.com/wiki/convert-dynamic-disk-and-cluster-size
Applies to: S.A.K. Utility (SAK), a free portable Windows toolkit
Updated: 2026-11-10

To convert a dynamic disk to basic, change a cluster size, or convert FAT32 to NTFS on Windows, use Partition Manager in S.A.K. Utility: open the **Partition Manager** tab, select the disk or partition, and click the matching action in **Partition Operations**. Most of these back up the volume, rebuild it, restore the files, and check them, and all of them wait in the queue until you press **Apply**.

## When to use this

- **Convert Dynamic Disk to Basic:** a data disk is dynamic, and you want a normal basic disk.
- **Change Cluster Size:** a volume uses the wrong allocation size for its files.
- **Convert File System:** a FAT or FAT32 volume needs to become NTFS.
- **Convert Primary/Logical:** an MBR data disk needs the other partition kind.
- **Reformat for New Serial Number:** a volume needs a new serial number, for example after cloning.

## What you need

- A mounted data partition with a drive letter, on a disk other than the one running Windows.
- For all but **Convert File System**: a backup folder on a different volume, with room for all the files.
- Administrator approval when you press **Apply**.

## Steps

Each procedure below ends the same way. Optionally press **Dry Run**, then press **Apply**, read the **Apply Partition Operations** window, press **Apply** in it, and approve the Windows prompt.

### Convert a dynamic disk to basic

A dynamic disk shows in the table marked **Dynamic**, with its volumes. Windows' storage commands leave these disks out, so S.A.K. asks the disk itself. Nothing but this conversion can change one.

1. Press **Scan Disks** and select the **disk** row. It must hold one mounted simple volume.
2. Click **Convert Dynamic Disk to Basic**. On a basic disk it is grayed out, in the ribbon and in the disk's right-click menu, and its tip says the disk is basic: there is nothing to convert.
3. Next to **Backup directory:**, press **Browse** and pick a folder on another volume.
4. Check **I understand this will delete the dynamic volume and rebuild it as basic.**
5. Press **Add to Queue**.

![The Convert Dynamic Disk to Basic window with a backup directory, a status line, and a confirmation checkbox](https://sakutility.com/screenshots/wiki/partition_manager_dynamic_dialog.webp?v=baeed5deec)

*Converting a dynamic disk needs a backup folder elsewhere*

### Change a cluster size

1. Select a partition with a drive letter.
2. Click **Change Cluster Size**.
3. Set **File system:** and **Target cluster size:**. **Add to Queue** stays gray if the size is **Default**. Set **Label:** if you want to change it.
4. Choose a **Backup directory:** on another volume.
5. Check **I understand this will reformat the selected volume after backup.**
6. Press **Add to Queue**.

The cluster size is the smallest block a file can occupy. Larger clusters suit big files. Smaller ones waste less space on many tiny files.

![The Change Cluster Size window with file system, target cluster size, label, and backup directory](https://sakutility.com/screenshots/wiki/partition_manager_cluster_dialog.webp?v=0ae75e55ee)

*Change Cluster Size backs up, reformats, and restores*

### Convert FAT32 to NTFS

1. Select a FAT or FAT32 partition with a drive letter.
2. Click **Convert File System**. It goes straight into the queue.

### Convert primary to logical, or logical to primary

1. Select the partition. The disk must be MBR and hold only this one partition.
2. Click **Convert Primary/Logical**. The window says which way it will convert.
3. Choose a **Backup directory:** on another volume.
4. Check **I understand this will clear and rebuild this single-volume MBR data disk.**
5. Press **Add to Queue**.

![The Convert Primary/Logical window with a backup directory and a confirmation checkbox](https://sakutility.com/screenshots/wiki/partition_manager_primary_logical_dialog.webp?v=a8c2c32544)

*This clears and rebuilds the whole disk*

### Get a new volume serial number

1. Select a partition with a drive letter.
2. Click **Reformat for New Serial Number**.
3. Choose a **Backup directory:** on another volume.
4. Check **I understand this will reformat the selected volume, then restore and verify files.**
5. Press **Add to Queue**.

![The Reformat for New Serial Number window with a backup directory and a confirmation checkbox](https://sakutility.com/screenshots/wiki/partition_manager_serial_dialog.webp?v=09b5747def)

*A format creates the new serial number*

## How it works

**Convert File System** runs Windows' `convert.exe` with `/NoSecurity /X`, which keeps your files where they are. S.A.K. answers its question about the volume's label for you. `/X` dismounts the volume first, so close anything using it, because open files on it lose unsaved changes.

The others share one approach, because these changes cannot be made in place:

1. Copy every file to your backup folder, using a Windows shadow copy (a frozen snapshot of the volume) where the file system supports one.
2. Rebuild the volume. That means a reformat for cluster size and serial number, and clearing and recreating the disk layout for the two disk conversions.
3. Copy the files back.
4. Compare a SHA-256 fingerprint of every file against the backup, and stop with an error if any differ.
5. Scan the volume for errors.

## Good to know

> **Back up first.** Copy anything you care about to another drive before you press **Apply**. On the v0.9.3 code, Partition Manager operations, including boot repair, MBR-to-GPT conversion and OS migration, ran through the app on disposable virtual machines and virtual disks. Some operations were also tested on one SAMSUNG MZVL2512HCJQ-00BH1 512 GB NVMe SSD and one Seagate Expansion Desk 8 TB USB disk. Internal SATA drives were not tested, and results on other devices may differ. See [what was tested](https://sakutility.com/wiki/partition-manager-basics#what-was-tested). Applied changes cannot be undone.

- **Your files exist only in the backup folder for a time.** During a rebuild, the original volume is gone. If the operation stops partway, look in the backup folder.
- **Long jobs run as long as they need.** A copy, wipe, move, or full format takes as long as the drive takes, which can be days on a large one. **Cancel** ends it. The backup, rebuild, restore, and fingerprint check all run as one job, and during it the files may exist only in your backup folder.
- **Keep the backup folder until you have checked your files.** S.A.K. leaves it in place afterwards, so delete it yourself.
- **Some things are not copied back.** The copy skips junctions (a kind of folder shortcut), so recreate any you rely on.
- **FAT32 to NTFS is one way and changes file security.** S.A.K. cannot convert back. Because it uses `/NoSecurity`, converted files can be opened by all users, so set permissions afterwards if they matter. exFAT is refused.
- **File system limits.** The backup-based tools work on NTFS, FAT32, and exFAT, and **Change Cluster Size** also offers ReFS.
- **A new serial number can affect software.** Programs licensed to a volume's serial number may ask you to activate them again.
- **A dynamic disk with more than one volume is refused.** You see **Only one mounted simple dynamic volume can be converted directly.** A volume that also lies on another disk is refused when you press **Apply**, and nothing changes.
- **Blocked targets.** These tools refuse the disk Windows is running from, and system, boot, EFI, MSR, and recovery partitions. A message then says why.

## Related guides

- [Convert a disk from MBR to GPT](https://sakutility.com/wiki/convert-mbr-to-gpt)
- [Partition maintenance tools](https://sakutility.com/wiki/partition-maintenance-tools)
- [Create, delete, or format a partition](https://sakutility.com/wiki/create-delete-format-partition)
- [Partition Manager basics](https://sakutility.com/wiki/partition-manager-basics)
