# Convert a disk from MBR to GPT

> Convert the Windows disk from MBR to GPT with Microsoft's MBR2GPT through S.A.K. Utility, or change the partition style of an empty data disk.

Source: https://sakutility.com/wiki/convert-mbr-to-gpt
Applies to: S.A.K. Utility (SAK), a free portable Windows toolkit
Updated: 2026-11-10

To convert a disk from MBR to GPT on Windows, use Partition Manager in S.A.K. Utility: open the **Partition Manager** tab, select the disk, click **Convert MBR/GPT**, choose **GPT**, and press **Apply**. On the disk Windows runs from, this keeps your data and uses Microsoft's MBR2GPT tool. On any other disk, it only works if the disk is empty.

MBR and GPT are two ways a disk keeps its list of partitions. GPT is needed for UEFI boot, Windows 11, and disks over 2 TB. MBR is for older PCs.

## When to use this

- You want to move a PC from legacy BIOS boot to UEFI, for example to meet Windows 11's requirements.
- You have an empty data disk in the wrong style.

## What you need

- A full backup. Converting a boot disk can leave the PC unable to start.
- For the Windows disk: a PC whose firmware supports UEFI. MBR2GPT runs its own checks first and stops if the disk does not qualify, for example if it has more than three primary partitions.
- For another disk: no partitions on it. Delete them first, which destroys their data. The small reserved partition Windows makes on a GPT disk does not count, because it holds no files.
- Administrator approval when you press **Apply**.

## Steps

1. Press **Scan Disks** and select the **disk** row. The disk map shows its current style beside its bar.
2. Click **Convert MBR/GPT**.
3. A window titled **Convert Disk N** opens, where N is the disk you picked. Its list, **Partition style (now MBR):** or **(now GPT):**, starts on the style the disk is not. Choose **GPT** or **MBR** and press **OK**.
4. Optional: press **Dry Run**.
5. Press **Apply**, read the **Apply Partition Operations** window, press **Apply** in it, and approve the Windows prompt.
6. If you converted the Windows disk, restart, enter your firmware settings, and switch the boot mode to UEFI. Windows will not start until you do.

![A small window titled Convert Disk 2 with a Partition style list](https://sakutility.com/screenshots/wiki/partition_manager_convert_style_prompt.webp?v=93a835d848)

*Choose the partition style you want*

## How it works

**On the Windows disk,** S.A.K. runs Microsoft's `mbr2gpt.exe`, first with `/validate` and then, only if that passes, with `/convert`. MBR2GPT rewrites the partition list and creates the boot files UEFI needs, without touching your files.

**On an empty data disk,** S.A.K. brings the disk online, confirms it has no partitions, and sets the new style with Windows' own storage commands.

## Good to know

> **Back up first.** Copy anything you care about to another drive before you press **Apply**. On the v0.9.3 code, Partition Manager operations, including boot repair, MBR-to-GPT conversion and OS migration, ran through the app on disposable virtual machines and virtual disks. Some operations were also tested on one SAMSUNG MZVL2512HCJQ-00BH1 512 GB NVMe SSD and one Seagate Expansion Desk 8 TB USB disk. Internal SATA drives were not tested, and results on other devices may differ. See [what was tested](https://sakutility.com/wiki/partition-manager-basics#what-was-tested). It cannot be undone with this tool.

- **Data disks must be empty.** If a data disk has partitions, the conversion is refused, and a message says why. S.A.K. does not convert a data disk in place. Move your files off, use **Delete All Partitions**, then convert.
- **The Windows disk only goes one way.** GPT to MBR is refused on it.
- **Switch the firmware afterwards.** A converted disk will not boot in legacy BIOS mode, and the conversion does not change your firmware setting for you.
- **Suspend BitLocker first** if the Windows disk uses it, and resume it after you have started Windows again. See [Manage BitLocker](https://sakutility.com/wiki/partition-maintenance-tools).
- **Save your BitLocker recovery key too.** See [Back up BitLocker keys](https://sakutility.com/wiki/back-up-bitlocker-keys).

## Related guides

- [Create, delete, or format a partition](https://sakutility.com/wiki/create-delete-format-partition)
- [Convert a dynamic disk, file system, or cluster size](https://sakutility.com/wiki/convert-dynamic-disk-and-cluster-size)
- [Back up BitLocker keys](https://sakutility.com/wiki/back-up-bitlocker-keys)
- [Partition Manager basics](https://sakutility.com/wiki/partition-manager-basics)
