# Clone a disk or copy a partition

> Clone a whole disk to another, copy a partition to free space or an image file, or save and restore a disk image with S.A.K. Utility on Windows.

Source: https://sakutility.com/wiki/copy-disk-or-partition
Applies to: S.A.K. Utility (SAK), a free portable Windows toolkit
Updated: 2026-11-10

To clone a disk on Windows, use the **Copy Disk Wizard** in S.A.K. Utility: open the **Partition Manager** tab, select the source disk, click **Copy Disk Wizard**, and choose a target disk at least as large. Use **Copy Partition Wizard** for one partition. Right-click a disk for image files. All of these wait in the queue until you press **Apply**.

## When to use this

- **Copy Disk Wizard:** replace a data disk, or keep a spare identical copy. To move the disk Windows runs from, use [the migration wizard](https://sakutility.com/wiki/migrate-windows-to-ssd).
- **Copy Partition Wizard:** copy one partition into free space on another disk, or to an image file.
- **Create Disk Image** and **Restore Disk Image:** save a whole disk to one file and write it back later.

## What you need

- A target with nothing on it you want to keep.
- For a disk copy: a target disk at least as large as the whole source disk, not on the disk running Windows.
- For a partition copy: a source partition with a drive letter.
- For images: a place to store the file that is not on the disk being imaged or restored.
- Administrator approval when you press **Apply**.

## Steps

### Clone a disk

1. Press **Scan Disks** and select the source **disk** row.
2. Click **Copy Disk Wizard**. The **Source** page names the source. Press **Next >**.
3. On **Target Disk**, choose **Target disk:** and press **Next >**. The disk this PC runs from stays in the list, turned off, with the reason beside it. If no other disk can take the copy, **Finish** stays off and the **Review** page says why.
4. On **Options**, set **Verify:** to **Sample verification** or **Full verification**, and press **Next >**.
5. On **Review**, check the summary. Check **I understand the selected target disk will be overwritten.** and press **Finish**.
6. Press **Apply**, read the **Apply Partition Operations** window, press **Apply** in it, and approve the Windows prompt.

![The Review page of the Copy Disk Wizard, with source and target bars, a summary, and the overwrite confirmation](https://sakutility.com/screenshots/wiki/partition_manager_copy_disk_review.webp?v=f5e901ed10)

*Check the source and target before you confirm*

### Copy a partition

1. Select the source partition. It must have a drive letter.
2. Click **Copy Partition Wizard**. The **Source Partition** page names it. Press **Next >**.
3. On **Target**, set **Target region:**. Pick a **Disk ... unallocated** entry to copy into free space. Pick **Image or custom volume/device path** to type a location in **Target path:**, such as an image file name.
4. Press **Next >**. On **Options**, set **Verify:** and press **Next >**.
5. On **Review**, check **I understand the selected target path or region will be overwritten.** and press **Finish**.
6. Press **Apply** as above.

![The Target page of the Copy Partition Wizard with a Target region list, a Target path box, and source and target size bars](https://sakutility.com/screenshots/wiki/partition_manager_copy_partition_target.webp?v=f376d1c019)

*Choose free space on another disk, or a file path*

![The Review page of the Copy Partition Wizard with a summary and the overwrite confirmation](https://sakutility.com/screenshots/wiki/partition_manager_copy_partition_review.webp?v=52e5989cd6)

*Review the partition copy*

### Save a disk or partition to an image file

1. Right-click the disk row and choose **Create Disk Image**, or right-click a partition and choose **Create Partition Image**.
2. Choose where to save the `.img` file. It cannot be on the source disk. If the file already exists, the save window asks whether to replace it, and **Yes** replaces it when the job runs.
3. Press **Apply** as above.

### Restore a disk image

1. Right-click the target disk row and choose **Restore Disk Image**.
2. Pick the `.img` file. S.A.K. reads the whole file to fingerprint it, which can take a while.
3. Read the question. It shows the file, the sizes, and the SHA-256 fingerprint. Press **Yes** to queue the restore.
4. Press **Apply** as above.

![A question asking whether to queue the image restore, showing the image size, target size, and SHA-256 fingerprint](https://sakutility.com/screenshots/wiki/partition_manager_restore_image_confirm.webp?v=414ac57ebe)

*The restore shows you exactly which image it will write*

## How it works

All of these copy raw bytes, not individual files, so a copy takes as long as the full size of the source, however little of it is in use. The target disk goes offline during a copy, and everything on it disappears from Windows until the copy finishes. **Sample verification** compares three blocks. **Full verification** compares every byte. Create Image always uses full verification.

Creating an image, and copying a partition, lock the source volume first, so nothing can change it during the copy. If a volume is in use and cannot be locked, such as the one Windows is running from, the operation stops with an error. Close what is using it and try again. A read-only partition can be copied, because a copy only reads it.

A restore checks the image's fingerprint again just before writing, and refuses if the file has changed since you approved it.

## Good to know

> **Back up first.** Copy anything you care about to another drive before you press **Apply**. On the v0.9.3 code, Partition Manager operations, including boot repair, MBR-to-GPT conversion and OS migration, ran through the app on disposable virtual machines and virtual disks. Some operations were also tested on one SAMSUNG MZVL2512HCJQ-00BH1 512 GB NVMe SSD and one Seagate Expansion Desk 8 TB USB disk. Internal SATA drives were not tested, and results on other devices may differ. See [what was tested](https://sakutility.com/wiki/partition-manager-basics#what-was-tested). Everything on the target is overwritten, and this cannot be undone.

- **Long jobs run as long as they need.** A copy, wipe, move, or full format takes as long as the drive takes, which can be days on a large one. **Cancel** ends it. At 200 MB per second an 8 TB disk takes about 11 hours, and twice that with **Full verification**. A copy or restore you stop partway leaves the target unusable, and a target disk may stay offline until you bring it back online in Windows Disk Management.
- **Disk copies are byte for byte.** The target's partitions keep the source's sizes, places, and partition style. On a larger target the extra space stays unallocated.
- **A partition copied into free space does not appear as a partition by itself.** S.A.K. writes the bytes there but does not add a partition entry. To make it show up, use the write-back page of the [Partition Recovery Wizard](https://sakutility.com/wiki/recover-lost-partition) with the same offset and size.
- **Typing a raw path overwrites it.** A device path such as `\\.\E:` in **Target path:** writes over that volume. It is refused if the volume is a system volume, is smaller than the source, or is not on the disk list. A whole-disk path such as `\\.\PhysicalDrive2` is refused here, so choose a free space entry instead.
- **Restore limits.** The image must be on a local drive that appears in the disk list, on a different disk from the target, and no larger than the target. Network locations are refused. It cannot restore over the disk Windows is running from.
- **An image takes the full size of the source.** A 1 TB disk makes a 1 TB image file, with no compression.

## Related guides

- [Move Windows to a new SSD or hard drive](https://sakutility.com/wiki/migrate-windows-to-ssd)
- [Recover a lost or deleted partition](https://sakutility.com/wiki/recover-lost-partition)
- [Flash an ISO to a USB drive](https://sakutility.com/wiki/flash-iso-to-usb)
- [Partition Manager basics](https://sakutility.com/wiki/partition-manager-basics)
