# Create, delete, or format a partition

> Create or delete partitions, lay out a whole disk, and format as NTFS, exFAT, FAT32, ext4, HFS+, APFS, or Linux swap on Windows with S.A.K. Utility.

Source: https://sakutility.com/wiki/create-delete-format-partition
Applies to: S.A.K. Utility (SAK), a free portable Windows toolkit
Updated: 2026-11-15

To create, delete, or format a partition on Windows, use Partition Manager in S.A.K. Utility: open the **Partition Manager** tab, select a row, and click **Create Partition**, **Delete Partition**, or **Format Partition**. The change waits in the queue until you press **Apply**. These tools do not work on the disk Windows is running from.

## When to use this

- You added a new drive and need to set it up. **Initialize Disk** and **Quick Partition** handle that.
- You want a partition gone, or empty and ready for a new use.
- You need a drive formatted for a Mac or Linux machine, from Windows.

## What you need

- A disk other than the one running Windows.
- Administrator approval when you press **Apply**.

## Steps

Every procedure below ends the same way. Optionally press **Dry Run**, then press **Apply**, read the **Apply Partition Operations** window, press **Apply** in it, and approve the Windows prompt.

### Create a partition

1. Press **Scan Disks** and select an **Unallocated** row.
2. Click **Create Partition**.
3. Set **Size:** in MB, or drag **Size handle:**. Set **Free space before:** or **Location handle:** to leave a gap in front of it.
4. Choose **Partition type:**. **Default data partition** suits most uses. The list also offers **GPT Basic Data**, **GPT Recovery**, and **GPT EFI System** on GPT disks, and **MBR IFS/NTFS primary** and **MBR FAT32 primary** on MBR disks.
5. Choose **File system:** (**NTFS**, **exFAT**, or **FAT32**), **Cluster size:**, **Label:**, and **Drive letter:**.
6. Optional: check **Overwrite all sectors (slow full format)**.
7. Press **Add to Queue**.

![The Create Partition window with size and position fields, type and file system lists, a label, a drive letter, and a free space bar](https://sakutility.com/screenshots/wiki/partition_manager_create_dialog.webp?v=1fa44386a7)

*The Create Partition window*

For ext, HFS+, APFS, or Linux swap, create the partition first, then format it.

### Delete a partition

1. Select the partition.
2. Click **Delete Partition**.

No window opens. The delete goes straight into the queue, and the **Apply Partition Operations** window is your chance to check it.

### Format a partition

1. Select the partition.
2. Click **Format Partition**.
3. Choose **File system:**: **NTFS**, **exFAT**, **FAT32**, **ext2**, **ext3**, **ext4**, **HFS+**, **HFSX**, **APFS**, or **Linux swap**.
4. Set **Label:**. For Windows file systems you can also set **Cluster size:** and **Overwrite all sectors (slow full format)**. **Cluster size:** lists only the sizes Windows can format that file system with on this partition, and greys out the rest. On a 2 GB partition, for example, FAT32 cannot use 32 KB or 64 KB clusters, because they make fewer than the 65,525 clusters FAT32 needs.
5. For a Mac or Linux file system, check the confirmation box that appears.
6. Press **Add to Queue**.

![The Format Partition window with NTFS selected, showing file system, cluster size, and label](https://sakutility.com/screenshots/wiki/partition_manager_format_dialog.webp?v=624f78cbf1)

*Formatting with a Windows file system*

![The Format Partition window for a 2 GB partition with FAT32 chosen and the Cluster size list open, Default selected, and 32 KB and 64 KB greyed out](https://sakutility.com/screenshots/wiki/partition_manager_format_cluster_sizes.webp?v=a3bd05a478)

*Only the cluster sizes Windows can use are offered*

Extra fields appear for some choices:

- **Linux swap** adds **Swap page size:**. Use 4096 for most systems. It must match the memory page size of the machine that will use it.
- **APFS** adds **Additional APFS volumes:**, a comma-separated list of extra volume names, and **Encrypt (FileVault)**, which adds **Volume password:** and an optional **Recovery key:**.

![The Format Partition window with APFS selected and Encrypt checked, showing volume names, password, and recovery key fields](https://sakutility.com/screenshots/wiki/partition_manager_format_apfs_dialog.webp?v=2262efc803)

*Extra fields when formatting as APFS*

### Lay out a whole disk with Quick Partition

1. Select the disk row.
2. Click **Quick Partition**.
3. Set **Partition count:** to how many you want, up to 9, or 4 on an MBR disk.
4. For a blank disk, choose **Partition style:**, **GPT** or **MBR**. An existing disk keeps its style.
5. Set **Size mode:** to **Equal size** or **Custom sizes**. With custom sizes, fill in a label and size for each row in the table. Each must be at least 64 MB.
6. Choose **File system:** and **Cluster size:**. For equal sizes, set **Label prefix:**.
7. Read the sentence at the bottom. If the disk has partitions, it begins **Delete existing partitions, then create**.
8. Press **Add to Queue**.

Use **Preset:** with **Save**, **Load**, and **Delete** to keep a layout you use often.

![The Quick Partition window with a preset row, partition count, size mode, and a table of labels and sizes](https://sakutility.com/screenshots/wiki/partition_manager_quick_partition_dialog.webp?v=04ef7fab27)

*Quick Partition sets up a whole disk in one go*

### Initialize a new disk

1. Select the disk row of a blank disk.
2. Click **Initialize Disk**.
3. Choose **Partition style:**, **GPT** or **MBR**, and press **OK**.

Initialize gives the disk a partition table, which is the list of partitions it keeps at its start. GPT suits modern PCs and disks over 2 TB. MBR is for older PCs.

![A small window titled Initialize Disk with a partition style list](https://sakutility.com/screenshots/wiki/partition_manager_initialize_prompt.webp?v=6a13135c89)

*Choosing a partition style for a blank disk*

### Delete every partition on a disk

1. Select the disk row.
2. Click **Delete All Partitions**.
3. Press **Yes** to queue it.

![A question asking whether to queue deletion of every partition on the disk, with Yes and No](https://sakutility.com/screenshots/wiki/partition_manager_delete_all_prompt.webp?v=eeb96b2129)

*Deleting all partitions still waits for Apply*

### Change a drive letter or label

- **Change Drive Letter** asks for **New drive letter:** and queues the change.
- **Change Label** asks for **New partition label:** on a Windows volume with a drive letter, and queues the change. On an APFS volume it renames the volume.

S.A.K. Utility can create, change, rename and delete files and folders on APFS containers created by macOS, on a raw partition or disk image, through a crash-safe in-place copy-on-write engine. Separately, on earlier code (June to August 2026), S.A.K.'s HFS+ and APFS write engine was validated with Apple's own tools. It refuses Fusion and multi-device containers, sealed system volumes, case-sensitive volumes, and encrypted volumes without their password or recovery key.

![A small window asking for a new drive letter](https://sakutility.com/screenshots/wiki/partition_manager_drive_letter_prompt.webp?v=9c4764793d)

*Changing a drive letter*

![A small window asking for a new partition label](https://sakutility.com/screenshots/wiki/partition_manager_label_prompt.webp?v=01dfa5d9d9)

*Changing a label*

## How it works

Windows file systems are created by Windows' own storage commands. S.A.K. formats ext with the bundled `mke2fs` tool and HFS+ with the bundled `newfs_hfs` tool. It writes APFS containers and Linux swap headers with its own code. None of this needs a driver installed.

**Overwrite all sectors (slow full format)** writes zeros across the whole partition before formatting. This is much slower than a normal format, which leaves old data readable by recovery tools.

## Good to know

> **Back up first.** Copy anything you care about to another drive before you press **Apply**. On the v0.9.3 code, Partition Manager operations, including boot repair, MBR-to-GPT conversion and OS migration, ran through the app on disposable virtual machines and virtual disks. Some operations were also tested on one SAMSUNG MZVL2512HCJQ-00BH1 512 GB NVMe SSD and one Seagate Expansion Desk 8 TB USB disk. Internal SATA drives were not tested, and results on other devices may differ. Separately, on earlier code (June to August 2026), S.A.K.'s HFS+ and APFS write engine was validated with Apple's own tools. See [what was tested](https://sakutility.com/wiki/partition-manager-basics#what-was-tested). Applied changes cannot be undone.

- **Format destroys files.** So do Delete and Quick Partition on a disk with data. Quick Partition deletes everything on the disk first.
- **Overwriting takes as long as the drive takes.** **Overwrite all sectors (slow full format)** writes the whole partition, which can be many hours on a large one. **Cancel** ends it, and leaves the partition part way through. Windows does not allow it on a thin-provisioned disk, which is how it reports a virtual disk file, and S.A.K. says so before it changes anything.
- **Delete does not erase data.** It removes the partition from the list, and the data stays until something overwrites it. See [Wipe a drive, partition, or free space](https://sakutility.com/wiki/wipe-drive-or-partition) to erase it, or [Recover a lost or deleted partition](https://sakutility.com/wiki/recover-lost-partition) to get one back.
- **APFS size limits.** The target must be 64 MB to 24 TB. **Encrypt (FileVault)** works only on partitions up to 128 MB. On a larger one, the format is not added to the queue, and a message says why.
- **Blocked targets.** These tools refuse the disk Windows is running from, system, boot, EFI, MSR, and recovery partitions, dynamic disks, and Storage Spaces. A message then says why. **Initialize Disk** also needs a disk with no partitions.
- **Non-Windows formats have no cluster size or overwrite option.** Those fields gray out.

## Related guides

- [Partition Manager basics](https://sakutility.com/wiki/partition-manager-basics)
- [Read Mac and Linux disks on Windows](https://sakutility.com/wiki/browse-mac-and-linux-disks)
- [Convert a disk from MBR to GPT](https://sakutility.com/wiki/convert-mbr-to-gpt)
- [Wipe a drive, partition, or free space](https://sakutility.com/wiki/wipe-drive-or-partition)
