# Get a PC hardware inventory and system report

> See a PC's CPU, memory, GPU, motherboard, OS, and temperatures in S.A.K. Utility, copy them to the clipboard, or save a system inventory report.

Source: https://sakutility.com/wiki/hardware-inventory
Applies to: S.A.K. Utility (SAK), a free portable Windows toolkit
Updated: 2026-11-11

To see what is inside a PC, use the Benchmark and Diagnostics tab in S.A.K. Utility: on the **Diagnostics** sub-tab, click **Scan Hardware**. To save a fuller record as a text file, click **System Inventory Report** on the same sub-tab and choose a folder.

## When to use this

Use the on-screen inventory for a quick look, such as checking how many memory slots are free. Use the report to keep a record of a PC when it comes in for service, or before you change anything on it.

## What you need

- No internet connection.
- No administrator rights for the inventory or the report. Temperature readings usually need them, and so do a drive's temperature and wear figures in the report. Click **Run as Admin** if you want those.

## Steps

### See the inventory on screen

1. Open the **Benchmark and Diagnostics** tab.
2. Click the **Diagnostics** sub-tab.
3. In **Hardware Inventory**, click **Scan Hardware**.
4. Read the **CPU**, **Memory**, **GPU**, **Motherboard**, **OS**, **Uptime**, and **Battery** rows. A value Windows does not report says so, such as **Uptime** reading **Unknown** or a battery with **Health not reported**, rather than showing a zero. A battery that gives no name of its own, such as a virtual machine's, is shown without one. A battery reads **Charging** only while it charges; on a charger and full it reads **On AC power**.

   ![Hardware Inventory group with filled-in rows for CPU, Memory, GPU, Motherboard, OS, Uptime, and Battery, above the Scan Hardware and Copy to Clipboard buttons](https://sakutility.com/screenshots/wiki/diagnostics_hardware_inventory.webp?v=188662e4e9)

*The scan also fills the drive list on the Benchmarks sub-tab*

5. To paste the details somewhere else, click **Copy to Clipboard**. It copies the CPU, memory, GPU, motherboard, OS, and uptime as text, so run a scan first.

### Check temperatures

1. Stay on the **Diagnostics** sub-tab and go to **Thermal Monitor**. It updates by itself about every 5 seconds while it is on screen.

   ![Thermal Monitor group with CPU, GPU, and Hottest disk rows: CPU and GPU read N/A - not reported by this PC, and the hottest disk shows a temperature on its bar](https://sakutility.com/screenshots/wiki/diagnostics_thermal.webp?v=6254cad0cc)

*N/A means the app has no reading for that sensor*

2. Read the values. They change color at 60 C and again at 80 C.

### Save the system report

1. In **System Maintenance**, click **System Inventory Report**.
2. Choose a folder in the window that opens. It starts in Documents. The app asks every time.

   ![Folder picker titled Choose where to save the system inventory report](https://sakutility.com/screenshots/wiki/diagnostics_inventory_folder.webp?v=545efb49f4)

*Pick the folder, such as your service records*

3. Wait for the status bar to say **Completed: System Inventory Report** and show where the file went.

   ![Status bar message reading Completed: System Inventory Report, saved to a folder path](https://sakutility.com/screenshots/wiki/diagnostics_inventory_result.webp?v=9ecf57474f)

*The file is named SystemInventory plus the date and time*

## What the report contains

A plain text file named `SystemInventory_` plus the date and time, with these sections:

- Operating system, computer, and processor
- Memory and BIOS
- Time zone and language
- Windows activation: product name and ID, edition, license status, and license channel
- Storage devices: model, size, health status, and, where readable, temperature, power-on hours, and wear
- Active network adapters: name, MAC address, link speed, and IP address
- Every volume: file system, total, free, and available space
- Extra system details: host name, kernel version, and CPU architecture

## How it works

The inventory comes from Windows' own management data and graphics interface. Nothing is installed.

The temperatures come from three places. The CPU figure is the firmware's thermal zone sensor, which on many PCs is not the CPU core itself, so treat it as a rough guide. The app reads it through the class Windows keeps for administrators, and otherwise through its performance counters, which any account may read. The GPU figure comes from `nvidia-smi`, which NVIDIA's driver installs, so other graphics cards have none. The disk figure comes from Windows, and when Windows gives none it comes from the last SMART scan, and its bar says **from the SMART scan**.

## Good to know

- **Private details:** the report includes the BIOS serial number, Windows product ID, registered owner, computer name, MAC addresses, and IP addresses. Check it before you share it.
- **N/A temperatures** say why: **N/A - needs administrator rights**, **N/A - not reported by this PC** (many desktops report no thermal zone, and graphics cards other than NVIDIA's report nothing here), **N/A - did not answer in time**, **N/A - could not be read**, or, on the **Hottest disk:** row before **Scan SMART** has run, **N/A - not read yet; Scan SMART reads it**. A row that needs administrator rights does not stop the others from reading.
- **A drive that gives no temperature is not asked again** until a drive is plugged in or removed, or you press **Scan Hardware** or **Scan SMART**. Some USB enclosures take 10 seconds or more to say they have no reading, and asking them every few seconds slows everything else on that drive, a disk benchmark included.
- **The Hottest disk row** shows the hottest drive in the PC, whichever drive that is.
- **Partial reports:** if one section cannot be collected, the app still saves the file, marks that section as failed, and reports **Failed: System Inventory Report** with the file's location.
- **Two different reports:** this one is a live snapshot of the PC. The [Scan Report](https://sakutility.com/wiki/write-a-diagnostic-report) instead records the results of scans and tests you have run.

## Related guides

- [Run a full PC diagnostic and write a report](https://sakutility.com/wiki/write-a-diagnostic-report)
- [Check a drive's health](https://sakutility.com/wiki/check-drive-health)
- [Stress test a PC](https://sakutility.com/wiki/stress-test-a-pc)
