# Switch a PC to the High performance power plan

> Set Windows to the High performance power plan with one click in S.A.K. Utility. No administrator rights needed. Learn what changes and how to switch back.

Source: https://sakutility.com/wiki/optimize-power-plan
Applies to: S.A.K. Utility (SAK), a free portable Windows toolkit
Updated: 2026-11-01

To switch a PC to the High performance power plan, use the Benchmark and Diagnostics tab in S.A.K. Utility: on the **Diagnostics** sub-tab, click **Optimize Power** under **System Maintenance**. It makes Windows' built-in High performance plan the active one, and tells you which plan it replaced.

## When to use this

Use this before benchmarking, or on a desktop PC that feels held back by a power saving plan. On a laptop running on battery, it usually costs more battery life than it is worth.

## What you need

No administrator rights and no internet connection.

## Steps

1. Open the **Benchmark and Diagnostics** tab.
2. Click the **Diagnostics** sub-tab.
3. Turn on the **Log** switch at the bottom of the tab. The result text appears there.
4. Under **System Maintenance**, click **Optimize Power**. It starts straight away, with no question first.
5. Read the result in the log. The status bar only says **Completed: Optimize Power Settings** or starts with **Failed**.

   ![Log showing Switched to High performance, naming the previous plan](https://sakutility.com/screenshots/wiki/diagnostics_power_result.webp?v=f0947803ed)

*The message names the plan it replaced*

## What the result means

- **Switched to High performance (was: Balanced):** the plan changed. The previous plan's name appears in parentheses, so note it if you may want to go back.
- **Already using High performance power plan:** nothing changed.
- **Failed to activate High performance plan:** Windows refused. This can happen when the plan is hidden on the PC, or when a company policy manages power settings.
- **Power plan discovery failed; no plan was changed:** the app could not list the plans, so it did nothing.

## How it works

The app asks Windows' `powercfg` tool for the list of plans, and picks the built-in High or Ultimate Performance plan by its fixed ID. A custom plan that only has a similar name is not used. If neither built-in plan is listed, the app tries the standard High performance ID, and then reads back the active plan to confirm the change.

## Good to know

- **Display and sleep timers change too.** Each plan has its own timers for turning off the display, sleep, and hibernate, so those now follow the High performance plan.
- **The change stays** until you change it. The app does not switch back when it closes.
- **There is no undo button.** To go back, open **Power Options** in Windows Control Panel and choose the previous plan.

## Related guides

- [Benchmark a PC](https://sakutility.com/wiki/benchmark-a-pc)
- [Stress test a PC](https://sakutility.com/wiki/stress-test-a-pc)
- [Get a PC hardware inventory and system report](https://sakutility.com/wiki/hardware-inventory)
