# Resize or move a partition on Windows

> Shrink, grow, or move a data partition with Partition Manager in S.A.K. Utility. Resizes use Windows; moves back up, recreate, restore, and verify files.

Source: https://sakutility.com/wiki/resize-or-move-partition
Applies to: S.A.K. Utility (SAK), a free portable Windows toolkit
Updated: 2026-11-15

To resize or move a partition on Windows, use Partition Manager in S.A.K. Utility: open the **Partition Manager** tab, press **Scan Disks**, select the partition, and click **Resize/Move Partition**. The change waits in the queue until you press **Apply**. This does not work on the disk Windows is running from, including its data partitions.

![The Resize/Move Partition window with Mode, Target size, Start offset, and Adjacent free after fields, and bars comparing the current and target sizes](https://sakutility.com/screenshots/wiki/partition_manager_resize_dialog.webp?v=b940b8472e)

*The Resize/Move Partition window*

## When to use this

- A data partition is too big or too small, and there is free space right after it.
- You need to slide a partition along the disk so free space ends up where you want it.

If you only need to grow a partition, [Extend a partition into free space](https://sakutility.com/wiki/extend-partition) covers the shortcuts.

## What you need

- A data partition on a disk other than the one running Windows.
- For a move: a drive letter on the partition, and a backup folder on a different volume with room for all its files.
- Administrator approval when you press **Apply**.

## Steps

### Resize a partition

1. Press **Scan Disks** and select the partition.
2. Click **Resize/Move Partition**.
3. Leave **Mode:** on **Resize or extend with adjacent free space**.
4. Set **Target size:** in MB, or drag **Size handle:**. The box offers only sizes the queue will take for this file system. The largest is the current size plus the free space directly after the partition, which **Adjacent free after:** shows. The smallest is the space the files use, or the current size where the file system cannot shrink. Where the size cannot change at all, such as on FAT32 or exFAT, or on APFS with no free space after it, **Target size:** and **Size handle:** are greyed out, **Max online** shows only the current size, and the window says why. If there is free space after it, **Adjacent free after:** says it cannot be used, such as **21.89 GB, not usable for FAT32**.
5. Check the **Current**, **Target**, and **Max online** bars, and the sentence under them.
6. For an ext2, ext3, or ext4 partition, check **I understand this will resize the partition and then resize the ext file system to match.**
7. Press **Add to Queue**.
8. Optional: press **Dry Run**.
9. Press **Apply**, read the **Apply Partition Operations** window, press **Apply** in it, and approve the Windows prompt.

![The Resize/Move Partition window for a 2 GB FAT32 partition, with Target size and Size handle greyed out, Adjacent free after reading 21.89 GB, not usable for FAT32, the note that Windows cannot shrink or grow FAT32 or exFAT partitions, and Max online showing only the current size](https://sakutility.com/screenshots/wiki/partition_manager_resize_fat32_fixed.webp?v=5251d2cc62)

*A FAT32 partition keeps its size, and the window says why*

![The Resize/Move Partition window for a 1 GB APFS partition with Adjacent free after reading 0 B, Target size and Size handle greyed out, and the note that S.A.K. grows an APFS partition only into free space that follows it](https://sakutility.com/screenshots/wiki/partition_manager_resize_apfs_refusal.webp?v=3540d77135)

*An APFS partition with no free space after it cannot grow*

### Move a partition

1. Press **Scan Disks** and select the partition.
2. Click **Resize/Move Partition**.
3. Set **Mode:** to **Move partition start**.
4. Set **Start offset:** in MB. This is where the partition will begin on the disk. Set **Target size:** too if you want a new size.
5. Next to **Backup directory:**, press **Browse** and pick a folder on a different volume.
6. Check **I understand this will back up, delete, recreate, restore, and verify the selected partition.**
7. Press **Add to Queue**, then **Apply** as above.

![The Resize/Move Partition window in Move partition start mode, with Backup directory filled in and the confirmation box checked](https://sakutility.com/screenshots/wiki/partition_manager_move_dialog.webp?v=4ad41f6e7b)

*Moving a partition needs a backup folder on another volume*

## How it works

**A resize** of an NTFS or ReFS partition uses Windows' own resize command, so your files stay where they are. When the change runs, S.A.K. first asks Windows what range is allowed and stops if your size falls outside it.

**A move** cannot be done in place. It runs these steps:

1. Copies all files to your backup folder, using a Windows shadow copy (a frozen snapshot of the volume) where the file system supports one.
2. Deletes the partition.
3. Creates it again at the new position, with the same drive letter, file system, and label, and formats it.
4. Copies the files back.
5. Compares a SHA-256 fingerprint of every file against the backup, and stops with an error if any differ.
6. Scans the volume for errors.

## Good to know

> **Back up first.** Copy anything you care about to another drive before you press **Apply**. On the v0.9.3 code, Partition Manager operations, including boot repair, MBR-to-GPT conversion and OS migration, ran through the app on disposable virtual machines and virtual disks. Some operations were also tested on one SAMSUNG MZVL2512HCJQ-00BH1 512 GB NVMe SSD and one Seagate Expansion Desk 8 TB USB disk. Internal SATA drives were not tested, and results on other devices may differ. See [what was tested](https://sakutility.com/wiki/partition-manager-basics#what-was-tested). Applied changes cannot be undone.

- **A move has a window of risk.** During a move the original partition is deleted before the files are back. If it stops partway, your files may exist only in the backup folder.
- **Long jobs run as long as they need.** A copy, wipe, move, or full format takes as long as the drive takes, which can be days on a large one. **Cancel** ends it. A move's backup, restore, and fingerprint check all run as one job, and during it the files may exist only in your backup folder.
- **Keep the backup folder.** S.A.K. leaves it in place after a move, in a subfolder named `sak-move-backup-` plus an ID. Delete it yourself once you have checked your files.
- **Some things are not copied back.** The copy skips junctions (a kind of folder shortcut), so recreate any you rely on.
- **Moves work on NTFS, FAT32, and exFAT only.**
- **The disk Windows is running from is off limits.** So are system, boot, EFI, MSR, and recovery partitions, dynamic disks, and Storage Spaces. If you try, a message says why.
- **You cannot shrink below the used space.** Windows may refuse an even larger size if files it cannot move sit near the end of the partition. The operation then fails with **Target size outside supported range**.
- **Which file systems can change size.** Windows resizes NTFS and ReFS both ways. S.A.K. resizes ext2, ext3, and ext4 both ways, in place, with its bundled tools: a shrink checks the file system, shrinks it, shrinks the partition, then checks again. An APFS partition only grows: the box starts at its current size, and once the partition has grown, use **APFS Container** and **Resize container to fill partition**. If no free space follows it, the window says **S.A.K. grows an APFS partition only into free space that follows it, and there is none after this one.** FAT32 and exFAT keep their size, and the window says **Windows cannot shrink or grow FAT32 or exFAT partitions. Back up the files, then delete and recreate the partition at the size you want.** Any other file system is refused, with the reason.
- **Extend from donor partition cannot be queued.** That mode stays in the list, but **Add to Queue** is unavailable. Use **Allocate Free Space** instead.

## Related guides

- [Extend a partition into free space](https://sakutility.com/wiki/extend-partition)
- [Merge or split partitions](https://sakutility.com/wiki/merge-or-split-partitions)
- [Partition Manager basics](https://sakutility.com/wiki/partition-manager-basics)
