# Scan a PC for open ports on Windows

> Check which ports are open on a PC or device with the portable port scanner in S.A.K. Utility, using presets or your own port list.

Source: https://sakutility.com/wiki/scan-open-ports
Applies to: S.A.K. Utility (SAK), a free portable Windows toolkit
Updated: 2026-11-01

To scan a PC or device for open ports, use S.A.K. Utility: go to the **Network Management** tab, open **Network Diagnostics**, and choose **Port Scan**. Type the target, pick a preset or list your own ports, and press **Scan Ports**. A port is a numbered door that a network service listens on, such as 443 for secure websites.

## When to use this

- A program cannot connect, and you want to know whether the service is listening at all.
- You want to see what a device, such as a printer or server, offers on the network.
- You changed a firewall setting, and want to confirm the result.

## What you need

- The target's name or address.
- Permission to scan it. Scan only devices you own or have been asked to check.

The scan does not ask for administrator rights.

## Steps

1. Go to the **Network Management** tab and open **Network Diagnostics**.
2. Choose the **Port Scan** tab.
3. Type the name or address in **Target**.
4. Pick a list in **Preset**: **Common Services**, **Web Servers**, **Database**, **File Sharing**, **Email**, **Remote Access**, or **Top 100**. To use your own list, leave it on **Custom** and fill in **Custom Ports**, for example `80,443,8080-8090`.
5. Change the options if you need to. **Timeout** is how long to wait on each port (3000 ms), and **Concurrent** is how many to try at once (50).
6. Leave **Banner Grab** ticked to read the greeting a service sends, which can show what is running. Untick it for a lighter scan.
7. Press **Scan Ports**. Press **Stop** to end early.

The table shows **Port**, **State**, **Service**, **Response (ms)**, and **Banner**. **Response (ms)** for an open port is how long it took to connect, not the time spent waiting for a banner afterwards. When the scan ends, a line beside the buttons gives the totals, such as `Complete: 3 open, 18 closed, 0 filtered`.

![Port Scan tab with target 127.0.0.1, a custom port list, and the open ports listed with service names above a totals line](https://sakutility.com/screenshots/wiki/net_port_scan.webp?v=cfc8fdc9e3)

*Only open ports get a row in the table*

## How it works

S.A.K. Utility tries to connect to each port in turn. There are three outcomes:

- **Open**: something accepted the connection.
- **Closed**: the device answered and refused it.
- **Filtered**: nothing answered before the timeout, often because a firewall dropped the attempt.

## Good to know

- The table lists open ports only. Closed and filtered ports are counted in the totals line.
- An open port is not a fault in itself. It means a service is listening. Check that you expect it.
- Scanning a network you do not manage may break its rules, or the law where you are.
- Right-click a row to copy the port, service, or banner, or choose **Export to CSV...**.

## Related guides

- [Run ping, traceroute, and MTR on Windows](https://sakutility.com/wiki/ping-traceroute-mtr)
- [Audit Windows Firewall rules for conflicts and gaps](https://sakutility.com/wiki/audit-firewall-rules)
- [See active network connections and shared folders](https://sakutility.com/wiki/view-connections-and-shares)
