# Stress test a PC's CPU, memory, disk, and GPU

> Run a timed stress test on CPU, memory, disk, and GPU with S.A.K. Utility to find crashes, errors, and overheating, with a CPU temperature limit.

Source: https://sakutility.com/wiki/stress-test-a-pc
Applies to: S.A.K. Utility (SAK), a free portable Windows toolkit
Updated: 2026-11-06

To stress test a PC, use the Benchmark and Diagnostics tab in S.A.K. Utility: on the **Benchmarks** sub-tab, go to **Stress Testing**, tick the parts to test, set a duration, and click **Start Stress Test**. It runs those parts flat out and ends with **Status: PASSED** or **Status: FAILED**, or **Status: STOPPED** when you stop it first.

## When to use this

Use this to track down random crashes or freezes, to check a repaired or second-hand PC, or to confirm that cooling copes under load.

## What you need

- Administrator rights, so the temperature limit can work. The test runs without them, but the app then usually has no CPU temperature to watch. Click **Run as Admin** first.
- For a disk test, a filled **Drive:** list. Click **Scan Hardware** on the **Diagnostics** sub-tab first.
- A laptop plugged into power, and good airflow around the PC.

## Steps

1. Click **Run as Admin** in the status bar, and approve the Windows prompt.
2. Open the **Benchmark and Diagnostics** tab.
3. Click the **Benchmarks** sub-tab.
4. If you will test the disk, choose the drive under **Drive:** in **Disk I/O Benchmark**.
5. In **Stress Testing**, tick the **Components:** to test: **CPU**, **Memory**, **Disk**, or **GPU**. **CPU** and **Memory** start ticked.
6. Set **Duration (min)**, from 1 to 1440 minutes. It starts at 10.
7. Set **Thermal Limit**, from 60 to 110 degrees Celsius. It starts at 95.

   ![Stress Testing group with CPU and Memory ticked, a 10 minute duration, a thermal limit of 95, and Status: Not Running](https://sakutility.com/screenshots/wiki/diagnostics_stress_config.webp?v=065bb505e8)

*Start with the defaults*

8. Click **Start Stress Test**.
9. Watch **Elapsed**, **CPU Temp**, and **Errors**. They update every 5 seconds, and **Elapsed** shows the run's whole length when it ends.

   ![Stress Testing group during a run with Status: Running and live elapsed time, CPU temperature, and error count](https://sakutility.com/screenshots/wiki/diagnostics_stress_running.webp?v=f1831d5fbf)

*Check that CPU Temp shows a real number*

10. Wait for the result, or click **Stop Stress Test** to end early. The run ends within a second or two of its duration, and **Stop Stress Test** ends it within a few seconds.

    ![Stress Testing group showing Status: PASSED after the run finished](https://sakutility.com/screenshots/wiki/diagnostics_stress_result.webp?v=828b4b9205)

*PASSED means no errors and no thermal stop*

## How it works

- **CPU:** every logical processor runs heavy math continuously.
- **Memory:** the app takes 80 percent of the available memory, with a limit of 16 GB, fills it with a known pattern, reads it back, and repeats. A mismatch can point to faulty memory.
- **Disk:** the app repeatedly writes a 256 MB temporary file and forces it onto the disk. On the Windows drive the file goes in your temp folder, and on any other drive in its top folder. Windows removes the file when the test ends.
- **GPU:** the graphics card runs a compute workload through DirectX 11.

Every 5 seconds the app reads the CPU temperature. A slow reading never holds up the run or its end. The PC is kept awake during the run.

## Reading the result

- **Status: PASSED:** the run reached the full duration with no errors.
- **Status: FAILED** with **Thermal limit exceeded:** the CPU reached your limit, so the app stopped the test. Check fans, airflow, and thermal paste.
- **Status: FAILED** with an error count: the app stops soon after the first error. Memory pattern errors can mean faulty memory. A disk or GPU error can also mean the test could not start on that part, such as when no DirectX 11 graphics card is available.
- **Status: STOPPED** with **Cancelled by user:** you stopped it yourself, with **Stop** or by closing the app. This says nothing about the hardware either way. **Elapsed** shows how long it ran.

## Good to know

> A stress test pushes hardware hard on purpose and can expose a fault by crashing the PC. Save your work, and back up anything important first.

- **Check the CPU Temp reading.** If it says **no reading - the thermal limit is not being enforced**, the app cannot read a temperature, and the **Thermal Limit** cannot protect the PC. The test keeps running anyway, and the exported report says so too. Run as administrator, or watch temperatures with another tool.
- **The limit covers the CPU only.** The GPU and disk are not watched, even when they are being tested.
- **The limit stops the test.** When the CPU reaches it, the run ends and reports FAILED.
- **Memory use:** the PC will feel slow while the memory test runs.
- **Disk wear:** the disk test writes continuously, which wears an SSD. Keep the duration short on drives you care about.
- **Disk file on another drive:** Windows may only let administrators create files in the top folder of some drives. If the test cannot start there, run as administrator.
- **Saving results:** to keep the result, [export a Scan Report](https://sakutility.com/wiki/write-a-diagnostic-report).

## Related guides

- [Benchmark a PC](https://sakutility.com/wiki/benchmark-a-pc)
- [Run a full PC diagnostic and write a report](https://sakutility.com/wiki/write-a-diagnostic-report)
- [Get a PC hardware inventory and system report](https://sakutility.com/wiki/hardware-inventory)
