# Test internet and LAN speed between two PCs

> Measure internet speed, or LAN speed between two PCs with iPerf3 or LAN Transfer, in S.A.K. Utility. LAN Transfer tests speed only and copies no files.

Source: https://sakutility.com/wiki/test-network-speed
Applies to: S.A.K. Utility (SAK), a free portable Windows toolkit
Updated: 2026-11-15

To test network speed, use S.A.K. Utility: go to the **Network Management** tab, open **Network Diagnostics**, and choose **Bandwidth** or **LAN Transfer**. Use **Run Speed Test** for your internet speed. For a speed test between two PCs on the same network, use iPerf3 or LAN Transfer. LAN Transfer is a speed test only. It does not copy your files.

## When to use this

| You want to know | Use | You need |
|---|---|---|
| How fast this PC's internet is | **Internet Speed (HTTP)** on the **Bandwidth** tab | Internet |
| How fast two PCs talk, with jitter and packet loss | **LAN Bandwidth (iPerf3)** on the **Bandwidth** tab | A second PC running an iPerf3 server |
| How fast two copies of S.A.K. Utility can send data | **LAN Transfer** | A second PC running S.A.K. Utility |

## What you need

- For a test between two PCs: both on the same network, and the receiving PC's IP address. You can find it on the **Network Adapters** tab.
- iPerf3 comes with S.A.K. Utility, so a second copy of the app can act as the server. iPerf3 is a common tool for measuring network speed.
- For an iPerf3 server that another PC connects to: administrator rights. Click **Run as Admin** in the status bar first. The server adds a Windows Firewall rule so the other PC can reach it, and adding the rule needs these rights. LAN Transfer and the internet test do not need them.

## Steps

### Test your internet speed

1. Go to the **Network Management** tab and open **Network Diagnostics**.
2. Choose the **Bandwidth** tab.
3. Under **Internet Speed (HTTP)**, press **Run Speed Test**.
4. Read **Download**, **Upload**, and **Latency** when it finishes. Latency is the delay before a response starts. The numbers stay on screen until you run another test.

![Bandwidth tab with the LAN Bandwidth (iPerf3) form above and an Internet Speed (HTTP) result showing download, upload, and latency](https://sakutility.com/screenshots/wiki/net_bandwidth_tab.webp?v=2208482085)

*The Bandwidth tab holds both the iPerf3 test and the internet speed test*

### Test two PCs with iPerf3

On the PC that receives the test:

1. Open the **Bandwidth** tab.
2. Leave **Port** at 5201, or choose another.
3. In **Listen on:**, choose the network adapter the other PC can reach. Each connected adapter is listed by its name and IP address. The list starts on the adapter that holds this PC's default route, or on the one you used last time for this server.
4. Press **Start Server**. The label changes to **Server: Running on port 5201**.

If S.A.K. Utility is not running as administrator, the label reads **Server: Stopped (needs Run as Admin)** before you start. **Start Server** then starts nothing, and the status bar says **Run as Admin to start the iPerf3 server: adding its firewall rule needs administrator rights.** Click **Run as Admin** and start the server again. A server on `127.0.0.1`, which only this PC can reach, needs no administrator rights.

![The Bandwidth tab in a Standard session after Start Server was pressed, with the status bar and the log window both reading Run as Admin to start the iPerf3 server: adding its firewall rule needs administrator rights](https://sakutility.com/screenshots/wiki/net_bandwidth_server_refusal.webp?v=6febaa1330)

*Without administrator rights, Start Server says what it needs*

On the other PC:

1. Open the **Bandwidth** tab.
2. Type the receiving PC's address in **Server**, and use the same **Port**.
3. Set **Duration** (10 s by default) and **Streams** (1).
4. Leave **Bidirectional** ticked to test both directions at once.
5. Press **Run Test**.

You get **Download**, **Upload**, **Jitter**, **Packet Loss**, and **Retransmits**. They stay on screen until you run another test. The server handles one test and then stops, so press **Start Server** again for another run.

### Test two PCs with LAN Transfer

On the PC that receives the test:

1. Choose the **LAN Transfer** tab.
2. Under **LAN Transfer Server (Receiver)**, in **Listen on:**, choose the network adapter the sending PC can reach, as for iPerf3.
3. Leave **Listen Port** at 5050, or choose another.
4. Press **Start Server**. The label shows **Server: Running on port 5050**.

On the PC that sends:

1. Choose the **LAN Transfer** tab, and set **Listen Port** to the same number. The test connects to that port.
2. Under **LAN Transfer Client (Sender)**, type the receiving PC's address in **Target**.
3. Set **Duration** (10 s by default) and **Block Size** (64 KB).
4. Press **Run Transfer Test**.

You get the amount sent, the time taken, **Average Speed**, and **Peak Speed**. On the receiving PC, press **Stop Server** when you finish.

![LAN Transfer tab with the Receiver section showing Listen Port and a stopped server, and the Sender section showing Target, Duration, and Block Size](https://sakutility.com/screenshots/wiki/net_lan_transfer_form.webp?v=b95bb7844b)

*LAN Transfer has a receiver section and a sender section*

## How it works

The internet test downloads and uploads small amounts of test data from Cloudflare's public speed service and times them. It uses little data, so treat it as a quick check.

The iPerf3 test runs the iPerf3 program on both PCs, and they measure the link between them.

Both servers listen only on the adapter chosen in **Listen on:**, not on every network the PC is on. As its tooltip says, other devices reach the server at that address only, and it is not open on the PC's other networks. The iPerf3 server also drops a client that connects and then goes quiet, so a stalled connection cannot hold it.

LAN Transfer sends made-up data from one PC to the other for the time you set. The receiver counts it and throws it away. No file is sent or saved.

## Good to know

- The internet test and the iPerf3 test share one worker, so while one runs, neither **Run** button can be pressed. **Stop** can take a moment, and the buttons come back once the test has really stopped.
- A test you stop, or one that could not finish, says **No result. The test was stopped or could not finish.** If the delay could not be measured, **Latency** says **unknown**.
- **Generate Report...** at the bottom of the tab includes the last speed test result. See the network report guide below.
- To copy real files between PCs, use Windows file sharing or a USB drive. LAN Transfer does not do it.
- Before the iPerf3 server starts, S.A.K. Utility adds a temporary Windows Firewall rule, and the server starts only once the rule is in place. The rule lets in only the bundled iPerf3, on the address and port you chose, from devices on the same subnet, on private networks. It is removed when the server stops. A server on `127.0.0.1` needs no rule. If Windows refuses the rule while S.A.K. Utility is running as administrator, the status bar says **iPerf3 server not started: Windows Firewall did not add its inbound rule:** followed by Windows' own reason.
- LAN Transfer adds no firewall rule, so Windows Firewall may ask for permission on the receiving PC, or block the test.
- If LAN Transfer reports that the connection timed out, check that the server is running on the other PC, and that both use the same port.
- Wi-Fi results change a lot from moment to moment. Run a test more than once before you trust a number.

## Related guides

- [Run ping, traceroute, and MTR on Windows](https://sakutility.com/wiki/ping-traceroute-mtr)
- [Save a network diagnostics report](https://sakutility.com/wiki/network-diagnostics-report)
- [Analyze nearby Wi-Fi networks and channels](https://sakutility.com/wiki/analyze-wifi)
- [Audit Windows Firewall rules for conflicts and gaps](https://sakutility.com/wiki/audit-firewall-rules)
