# Wipe a drive, partition, or free space

> Wipe a whole disk, one partition, or only free space with S.A.K. Utility. The SSD erase is TRIM plus overwrite, not an ATA Secure Erase or NVMe Sanitize.

Source: https://sakutility.com/wiki/wipe-drive-or-partition
Applies to: S.A.K. Utility (SAK), a free portable Windows toolkit
Updated: 2026-11-10

To wipe a drive or partition on Windows, use Partition Manager in S.A.K. Utility: open the **Partition Manager** tab, select a disk or partition, and click **Wipe Partition**, or **Erase SSD (TRIM + Overwrite)** for an SSD. The wipe waits in the queue until you press **Apply**, then cannot be undone. The SSD erase is TRIM plus an overwrite. It is not an ATA Secure Erase or NVMe Sanitize command.

## When to use this

- You are selling, returning, or reusing a drive.
- You want to remove old data from a partition, or clear traces of deleted files without touching current ones.

## What you need

- A disk other than the one running Windows. S.A.K. refuses to wipe that disk, or even the free space on its partitions.
- A backup of anything you want to keep.
- Administrator approval when you press **Apply**.

## Steps

Each procedure below ends the same way. Optionally press **Dry Run**, then press **Apply**, read the **Apply Partition Operations** window, press **Apply** in it, and approve the Windows prompt.

### Wipe one partition or its free space

1. Press **Scan Disks** and select the partition.
2. Click **Wipe Partition**.
3. Set **Scope:** to **Free space only (keep existing files)** or **Entire partition (erase all data)**.
4. Check **I understand the selected data is overwritten.** and press **Add to Queue**.

![The Wipe Partition window with a Scope list and a confirmation checkbox](https://sakutility.com/screenshots/wiki/partition_manager_wipe_partition.webp?v=73aa822238)

*Choose free space only, or the entire partition*

### Wipe a whole disk

1. Select the **disk** row.
2. Click **Wipe Partition**. The window that opens is titled **Wipe Disk**.
3. Check **I understand this erases the entire disk and all of its partitions.** and press **Add to Queue**.

![The Wipe Disk window with a warning and a confirmation checkbox](https://sakutility.com/screenshots/wiki/partition_manager_wipe_disk.webp?v=30dd9de9fd)

*Wiping a whole disk removes every partition on it*

### Erase an SSD

1. Select the **disk** row of the SSD.
2. Click **Erase SSD (TRIM + Overwrite)**.
3. Read the list. Check **Model** and **Serial number**, and that **Erase status** begins **Ready**.
4. Press **Queue ReTrim + Overwrite**.
5. When asked, type the text shown, such as `ERASE DISK 2`, and press **OK**.

![The Erase SSD window listing the target disk, model, serial number, bus and media type, erase status, and erase method](https://sakutility.com/screenshots/wiki/partition_manager_erase_ssd.webp?v=58f851c9a9)

*This window says exactly what the erase does*

## How it works

| What you choose | What runs | What is left |
|---|---|---|
| **Free space only** | Windows' `cipher /w`, which overwrites the volume's unused space | Your files, unchanged |
| **Entire partition** | A full NTFS format, which writes zeros across the partition | An empty NTFS partition, whatever it was before |
| **Wipe Disk** | Clears the disk, makes one full-size partition, full-formats it, then clears the disk again | A blank disk with no partitions |
| **Erase SSD** | Sends TRIM to each volume with a drive letter, then does the same as **Wipe Disk** | A blank disk with no partitions |

A blank disk needs **Initialize Disk** before you can use it again. See [Create, delete, or format a partition](https://sakutility.com/wiki/create-delete-format-partition).

## Good to know

> **Back up first.** Everything you wipe is gone, and this cannot be undone. On the v0.9.3 code, Partition Manager operations, including boot repair, MBR-to-GPT conversion and OS migration, ran through the app on disposable virtual machines and virtual disks. Some operations were also tested on one SAMSUNG MZVL2512HCJQ-00BH1 512 GB NVMe SSD and one Seagate Expansion Desk 8 TB USB disk. Internal SATA drives were not tested, and results on other devices may differ. SSD erase is TRIM plus overwrite, not an ATA or NVMe sanitize. See [what was tested](https://sakutility.com/wiki/partition-manager-basics#what-was-tested).

> **The SSD erase is not a sanitize.** It does not send an ATA Secure Erase or NVMe Sanitize command. An SSD keeps spare memory cells that an overwrite cannot reach, so old data can survive there. S.A.K. warns: **SSD wipe uses software clear; vendor secure erase is required for purge**. If the data is sensitive, use the drive maker's secure erase tool.

- **A wipe takes as long as the drive takes.** A whole-disk wipe is one full format pass, which can be days on a large or slow drive. **Cancel** ends it. A wipe that stops early has only overwritten part of the drive, so treat that drive as not wiped. Check the result message before you trust a wipe.
- **A virtual disk file cannot be wiped this way.** A wipe is a full format, and Windows does not allow one on a thin-provisioned disk, which is how it reports a virtual disk file. S.A.K. checks first, says why, and changes nothing.
- **One pass.** **Wipe Disk** and **Entire partition** make a single full-format pass. On a hard drive this overwrites the sectors Windows can reach. Sectors the drive has retired are not touched.
- **On an SSD, the same applies to all these wipes.** A partition wipe is an overwrite too, with the same spare-cell limit.
- **Free space needs a drive letter.** **Free space only** is refused on a partition without one. The window chooses **Entire partition** for you when no letter is present, so read it before you confirm.
- **What counts as an SSD.** **Erase SSD** only accepts a disk that Windows reports as SSD or NVMe. Otherwise, **Erase status** says it is blocked, and **Queue ReTrim + Overwrite** stays gray.
- **Blocked targets.** Wipes refuse the disk Windows is running from, system, boot, EFI, MSR, and recovery partitions, read-only disks, dynamic disks, and Storage Spaces. A message then says why.
- **Deleting a partition is not wiping.** [Delete Partition](https://sakutility.com/wiki/create-delete-format-partition) leaves the data on the disk.

## Related guides

- [Create, delete, or format a partition](https://sakutility.com/wiki/create-delete-format-partition)
- [Check a drive's health](https://sakutility.com/wiki/check-drive-health)
- [Partition Manager basics](https://sakutility.com/wiki/partition-manager-basics)
