# Run a full PC diagnostic and write a report

> Run hardware, drive health, benchmark, and stress tests in one go with S.A.K. Utility, then save an HTML, JSON, or CSV report with your name, ticket, and notes.

Source: https://sakutility.com/wiki/write-a-diagnostic-report
Applies to: S.A.K. Utility (SAK), a free portable Windows toolkit
Updated: 2026-11-02

To run a full PC diagnostic and write a report, use the Benchmark and Diagnostics tab in S.A.K. Utility: on the **Benchmarks** sub-tab, click **Run Full Suite**, then fill in **Scan Report** and click **Export Scan Report**. The report covers the hardware, drive health, benchmarks, and stress test, with findings and recommendations.

## When to use this

Use this to give a customer a record of a PC's condition, to document a machine before and after a repair, or to attach results to a support ticket. You can also export a report after running only one or two tests on their own.

## What you need

- Administrator rights, so drive health data and CPU temperatures can be read. Click **Run as Admin** first. Without them, the report can leave drive health out.
- At least 1 GB free on the drive you test.
- Time. The suite runs the benchmarks plus the full stress test duration, which starts at 10 minutes.
- No internet connection.

## Steps

### Run the suite

1. Click **Run as Admin** in the status bar, and approve the Windows prompt.
2. Open the **Benchmark and Diagnostics** tab.
3. On the **Diagnostics** sub-tab, click **Scan Hardware**, and wait for it to finish. The suite will not start until this has filled the drive list.
4. Click the **Benchmarks** sub-tab.
5. In **Disk I/O Benchmark**, choose a drive under **Drive:**. The suite tests this drive.
6. In **Stress Testing**, set the components, **Duration (min)**, and **Thermal Limit**. The suite uses these settings.
7. In **Full Diagnostic Suite**, click **Run Full Suite**.
8. Watch the steps tick off: **Hardware Inventory**, **SMART Disk Health**, **CPU Benchmark**, **Disk I/O Benchmark**, **Memory Benchmark**, **Stress Test**, and **Aggregate Results**.

   ![Full Diagnostic Suite group with completed steps marked, the current step highlighted, and Cancel Suite and Skip Step buttons](https://sakutility.com/screenshots/wiki/diagnostics_suite_running.webp?v=e7dc4a0b67)

*Completed steps get a check mark*

9. To leave out the current step, click **Skip Step**. To stop everything, click **Cancel Suite**.
10. Wait for **Suite complete!**. The suite itself does not save a file.

    ![Full Diagnostic Suite group showing all steps complete and the message Suite complete](https://sakutility.com/screenshots/wiki/diagnostics_suite_complete.webp?v=9b5aaf6bb9)

*Now export the report*

### Export the report

1. In **Scan Report**, type a name in **Technician:**.
2. Type a reference in **Ticket #:**.
3. Type anything else worth recording in **Notes:**.

   ![Scan Report group with sample Technician, Ticket, and Notes values, above the Export Scan Report, Export JSON, and Export CSV buttons](https://sakutility.com/screenshots/wiki/diagnostics_report_fields.webp?v=cbfe6fb28c)

*All three fields are optional*

4. Click **Export Scan Report** to save the HTML report. To save the same results as data, click **Export JSON** or **Export CSV**.
5. Choose a folder.
6. Read the **Reports Generated** message, which names the folder.

   ![Reports Generated message saying the diagnostic reports were saved to a folder](https://sakutility.com/screenshots/wiki/diagnostics_report_saved.webp?v=e7370e4888)

*Files are named SAK_Diagnostic plus the date and time*

## What the report contains

The HTML report opens in any browser. It starts with your technician, ticket, and date details and an overall banner: **ALL TESTS PASSED**, **WARNINGS DETECTED**, or **CRITICAL ISSUES FOUND**. Then come these sections, when there are results for them:

- **Hardware Inventory**
- **Disk Health (SMART)**
- **Benchmark Results**
- **Stress Test Results**
- **Findings & Recommendations**, including advice that the tab itself does not show, such as replacing a failing drive
- **Notes**

The JSON and CSV copies hold the same kind of data for spreadsheets and other tools.

## How it works

The suite runs the same tests as the separate buttons, one after another, and collects the results. A step that fails or is skipped does not stop the rest, and the report lists it as a warning. **Aggregate Results** only works out the overall verdict. It writes nothing.

## Good to know

- **What the banner means.** **ALL TESTS PASSED** only appears when every step has a good result: the hardware scan, at least one readable drive and no unreadable ones, all three benchmarks, and the stress test. A report from fewer steps says **WARNINGS DETECTED**, and its warnings name each step with no result. A stress test that could not read the CPU temperature is flagged there too.
- **Partial reports are fine.** You can export after any scan or test. If nothing has run yet, the status bar says **No diagnostic results to report -- run a scan or the full suite first**.
- **Starting a suite clears earlier results**, so they will not appear in the next report.
- **What is left out:** **Verify System Files**, **Check Disk Errors**, and **Optimize Power** results do not go into this report.
- **Private details:** the report describes the PC's hardware, including drive serial numbers, and carries the names and notes you typed. Check it before you share it.

## Related guides

- [Check a drive's health](https://sakutility.com/wiki/check-drive-health)
- [Benchmark a PC](https://sakutility.com/wiki/benchmark-a-pc)
- [Stress test a PC](https://sakutility.com/wiki/stress-test-a-pc)
- [Get a PC hardware inventory and system report](https://sakutility.com/wiki/hardware-inventory)
