Analyze nearby Wi-Fi networks and channels

See nearby Wi-Fi networks with signal, channel, band, and security in S.A.K. Utility, and spot crowded channels. Needs a Wi-Fi adapter.

To see nearby Wi-Fi networks and how crowded each channel is, use S.A.K. Utility: go to the Network Management tab, open Network Diagnostics, choose Wi-Fi, and press Scan Wi-Fi. The table lists each network with its signal, channel, band, security, and vendor.

When to use this

  • Wi-Fi is slow or keeps dropping, and you suspect interference from neighbors.
  • You want to compare signal strength in different rooms.
  • You are choosing which channel to set on your router.

What you need

A PC with a Wi-Fi adapter. Without one, the status bar shows Wi-Fi hardware not available. No administrator rights are requested.

Steps

  1. Go to the Network Management tab and open Network Diagnostics.
  2. Choose the Wi-Fi tab.
  3. Press Scan Wi-Fi for one reading, or Continuous Scan to keep the list updating as you walk around. Press Stop to end a continuous scan.
  4. Read the table. Click a column heading to sort by it.
Wi-Fi tab with the Scan Wi-Fi, Continuous Scan, and Stop buttons above an empty table with columns for SSID, BSSID, Signal, Quality, Channel, Band, Security, and Vendor
The Wi-Fi tab before a scan

How it works

S.A.K. Utility asks Windows what the Wi-Fi adapter can hear. It only listens. It does not join any network, and it does not read saved passwords.

Each column means:

  • SSID: the network's name. Your current network is in bold, with a star after its name.
  • BSSID: the unique ID of one access point. One network can have several.
  • Signal: strength in dBm, a negative number where closer to zero is stronger. S.A.K. Utility shows -50 or better in green, down to -70 in orange, and weaker than that in red.
  • Quality: the same strength as a percentage.
  • Channel and Band: the slice of radio space in use.
  • Security: the protection the network uses.
  • Vendor: the likely maker of the access point.

Below the table, a line sums up each channel, such as Ch 6: 3 networks, avg -62 dBm. Many strong networks on your channel can slow you down, so a quieter channel may help. You change the channel on the router itself, not in S.A.K. Utility.

Good to know

  • If you see Wi-Fi scan failed, the Wi-Fi radio may be off, or the PC has no wireless adapter. Turn Wi-Fi on and try again.
  • Wi-Fi scan results may be stale means the adapter did not confirm a fresh scan, so the list may be slightly old.
  • Right-click a row to copy the name, BSSID, signal, or channel, or choose Export to CSV.... An export holds the names of nearby networks, so check it before you share it.
  • To share or save the networks this PC already knows, see the Wi-Fi Manager guide below.