To convert a disk from MBR to GPT on Windows, use Partition Manager in S.A.K. Utility: open the Partition Manager tab, select the disk, click Convert MBR/GPT, choose GPT, and press Apply. On the disk Windows runs from, this keeps your data and uses Microsoft's MBR2GPT tool. On any other disk, it only works if the disk is empty.
MBR and GPT are two ways a disk keeps its list of partitions. GPT is needed for UEFI boot, Windows 11, and disks over 2 TB. MBR is for older PCs.
When to use this
- You want to move a PC from legacy BIOS boot to UEFI, for example to meet Windows 11's requirements.
- You have an empty data disk in the wrong style.
What you need
- A full backup. Converting a boot disk can leave the PC unable to start.
- For the Windows disk: a PC whose firmware supports UEFI. MBR2GPT runs its own checks first and stops if the disk does not qualify, for example if it has more than three primary partitions.
- For another disk: no partitions on it. Delete them first, which destroys their data. The small reserved partition Windows makes on a GPT disk does not count, because it holds no files.
- Administrator approval when you press Apply.
Steps
- Press Scan Disks and select the disk row. The disk map shows its current style beside its bar.
- Click Convert MBR/GPT.
- A window titled Convert Disk N opens, where N is the disk you picked. Its list, Partition style (now MBR): or (now GPT):, starts on the style the disk is not. Choose GPT or MBR and press OK.
- Optional: press Dry Run.
- Press Apply, read the Apply Partition Operations window, press Apply in it, and approve the Windows prompt.
- If you converted the Windows disk, restart, enter your firmware settings, and switch the boot mode to UEFI. Windows will not start until you do.
How it works
On the Windows disk, S.A.K. runs Microsoft's mbr2gpt.exe, first with /validate and then, only if that passes, with /convert. MBR2GPT rewrites the partition list and creates the boot files UEFI needs, without touching your files.
On an empty data disk, S.A.K. brings the disk online, confirms it has no partitions, and sets the new style with Windows' own storage commands.
Good to know
Back up first. Copy anything you care about to another drive before you press Apply. On the v0.9.3 code, Partition Manager operations, including boot repair, MBR-to-GPT conversion and OS migration, ran through the app on disposable virtual machines and virtual disks. Some operations were also tested on one SAMSUNG MZVL2512HCJQ-00BH1 512 GB NVMe SSD and one Seagate Expansion Desk 8 TB USB disk. Internal SATA drives were not tested, and results on other devices may differ. See what was tested. It cannot be undone with this tool.
- Data disks must be empty. If a data disk has partitions, the conversion is refused, and a message says why. S.A.K. does not convert a data disk in place. Move your files off, use Delete All Partitions, then convert.
- The Windows disk only goes one way. GPT to MBR is refused on it.
- Switch the firmware afterwards. A converted disk will not boot in legacy BIOS mode, and the conversion does not change your firmware setting for you.
- Suspend BitLocker first if the Windows disk uses it, and resume it after you have started Windows again. See Manage BitLocker.
- Save your BitLocker recovery key too. See Back up BitLocker keys.