Wipe a drive, partition, or free space

Wipe a whole disk, one partition, or only free space with S.A.K. Utility. The SSD erase is TRIM plus overwrite, not an ATA Secure Erase or NVMe Sanitize.

To wipe a drive or partition on Windows, use Partition Manager in S.A.K. Utility: open the Partition Manager tab, select a disk or partition, and click Wipe Partition, or Erase SSD (TRIM + Overwrite) for an SSD. The wipe waits in the queue until you press Apply, then cannot be undone. The SSD erase is TRIM plus an overwrite. It is not an ATA Secure Erase or NVMe Sanitize command.

When to use this

  • You are selling, returning, or reusing a drive.
  • You want to remove old data from a partition, or clear traces of deleted files without touching current ones.

What you need

  • A disk other than the one running Windows. S.A.K. refuses to wipe that disk, or even the free space on its partitions.
  • A backup of anything you want to keep.
  • Administrator approval when you press Apply.

Steps

Each procedure below ends the same way. Optionally press Dry Run, then press Apply, read the Apply Partition Operations window, press Apply in it, and approve the Windows prompt.

Wipe one partition or its free space

  1. Press Scan Disks and select the partition.
  2. Click Wipe Partition.
  3. Set Scope: to Free space only (keep existing files) or Entire partition (erase all data).
  4. Check I understand the selected data is overwritten. and press Add to Queue.
The Wipe Partition window with a Scope list and a confirmation checkbox
Choose free space only, or the entire partition

Wipe a whole disk

  1. Select the disk row.
  2. Click Wipe Partition. The window that opens is titled Wipe Disk.
  3. Check I understand this erases the entire disk and all of its partitions. and press Add to Queue.
The Wipe Disk window with a warning and a confirmation checkbox
Wiping a whole disk removes every partition on it

Erase an SSD

  1. Select the disk row of the SSD.
  2. Click Erase SSD (TRIM + Overwrite).
  3. Read the list. Check Model and Serial number, and that Erase status begins Ready.
  4. Press Queue ReTrim + Overwrite.
  5. When asked, type the text shown, such as ERASE DISK 2, and press OK.
The Erase SSD window listing the target disk, model, serial number, bus and media type, erase status, and erase method
This window says exactly what the erase does

How it works

What you choose What runs What is left
Free space only Windows' cipher /w, which overwrites the volume's unused space Your files, unchanged
Entire partition A full NTFS format, which writes zeros across the partition An empty NTFS partition, whatever it was before
Wipe Disk Clears the disk, makes one full-size partition, full-formats it, then clears the disk again A blank disk with no partitions
Erase SSD Sends TRIM to each volume with a drive letter, then does the same as Wipe Disk A blank disk with no partitions

A blank disk needs Initialize Disk before you can use it again. See Create, delete, or format a partition.

Good to know

Back up first. Everything you wipe is gone, and this cannot be undone. On the v0.9.3 code, Partition Manager operations, including boot repair, MBR-to-GPT conversion and OS migration, ran through the app on disposable virtual machines and virtual disks. Some operations were also tested on one SAMSUNG MZVL2512HCJQ-00BH1 512 GB NVMe SSD and one Seagate Expansion Desk 8 TB USB disk. Internal SATA drives were not tested, and results on other devices may differ. SSD erase is TRIM plus overwrite, not an ATA or NVMe sanitize. See what was tested.

The SSD erase is not a sanitize. It does not send an ATA Secure Erase or NVMe Sanitize command. An SSD keeps spare memory cells that an overwrite cannot reach, so old data can survive there. S.A.K. warns: SSD wipe uses software clear; vendor secure erase is required for purge. If the data is sensitive, use the drive maker's secure erase tool.

  • A wipe takes as long as the drive takes. A whole-disk wipe is one full format pass, which can be days on a large or slow drive. Cancel ends it. A wipe that stops early has only overwritten part of the drive, so treat that drive as not wiped. Check the result message before you trust a wipe.
  • A virtual disk file cannot be wiped this way. A wipe is a full format, and Windows does not allow one on a thin-provisioned disk, which is how it reports a virtual disk file. S.A.K. checks first, says why, and changes nothing.
  • One pass. Wipe Disk and Entire partition make a single full-format pass. On a hard drive this overwrites the sectors Windows can reach. Sectors the drive has retired are not touched.
  • On an SSD, the same applies to all these wipes. A partition wipe is an overwrite too, with the same spare-cell limit.
  • Free space needs a drive letter. Free space only is refused on a partition without one. The window chooses Entire partition for you when no letter is present, so read it before you confirm.
  • What counts as an SSD. Erase SSD only accepts a disk that Windows reports as SSD or NVMe. Otherwise, Erase status says it is blocked, and Queue ReTrim + Overwrite stays gray.
  • Blocked targets. Wipes refuse the disk Windows is running from, system, boot, EFI, MSR, and recovery partitions, read-only disks, dynamic disks, and Storage Spaces. A message then says why.
  • Deleting a partition is not wiping. Delete Partition leaves the data on the disk.