Back up and restore static IP and DNS settings

Save an adapter's IP, gateway, and DNS settings to a file with S.A.K. Utility, then restore them on the same PC or another one.

To back up a network adapter's IP and DNS settings, use S.A.K. Utility: go to the Network Management tab, open Network Adapters, select the adapter, and press Backup Settings. To put them back, press Restore Settings and pick the file. The backup holds the MAC address, the DHCP setting, the IPv4 address and mask, the gateway, and the DNS servers.

When to use this

  • A PC has a hand-set IP address, and you are about to reinstall Windows or replace it.
  • You want your own copy before Reset Network. Reset Network saves and puts back the settings of every adapter that is turned on, but it cannot read a turned-off adapter's settings.
  • You need the same settings on a replacement PC.

What you need

  • For a backup: no special rights.
  • For a restore: administrator rights. Click Run as Admin in the status bar first. Without them, the restore ends with Restore Incomplete.

Steps

Save a backup

  1. Go to the Network Management tab and open Network Adapters.
  2. Click the adapter in the table.
  3. Press Backup Settings.
  4. Choose where to save the file and press Save. The suggested name ends in _settings_backup.json.
Save Adapter Settings Backup window with a suggested file name ending in _settings_backup.json
Choose where to keep the backup file

A Backup Complete message shows where the file went. Keep a copy somewhere other than the PC you are about to change.

Backup Complete message showing the path of the saved file
The backup file can restore this PC or another one

Restore a backup

A restore replaces the adapter's current IP settings, and you may lose your connection for a moment. If you restore a static address on a second PC while the first is still on the network, the two will clash.

  1. Click Run as Admin in the status bar, if the label beside it says Standard.
  2. Go to the Network Adapters tab and press Restore Settings.
  3. Pick the backup file.
  4. If the PC has more than one adapter that can take it, choose one under Select Target Adapter. From the right-click menu, the adapter you clicked is chosen to start with. From the Restore Settings button, the list starts on the adapter the backup was made from, then on one of the same type (Ethernet, Wi-Fi), and only then on the first in the list.
  5. Read the Confirm Restore message, and press Yes.
  6. Wait for Restore Complete. The adapter may take a moment to settle.
Confirm Restore message naming the adapter and warning that its current settings will be overwritten, with Yes and No buttons
Confirm Restore names the adapter that will change

How it works

The backup is a small text file in JSON format. It holds:

  • the MAC address, which is the adapter's hardware ID
  • whether DHCP is on
  • the IPv4 address and subnet mask
  • the gateway
  • the IPv4 DNS servers
  • the adapter's name, type (such as Ethernet or Wi-Fi), and description, the computer's name, and the time, so you can tell backups apart

If DHCP was on in the backup, a restore turns DHCP back on, and DNS goes back to automatic. If the settings were static, a restore sets the address, mask, gateway, and DNS servers. It leaves the gateway's priority (its metric) to Windows, as Windows' own adapter settings do, so on a PC with more than one network the restored adapter does not take over the default route.

Good to know

  • The backup does not hold driver details, link speed, or traffic counts. S.A.K. Utility shows those on screen only.
  • It does not hold IPv6 settings, Wi-Fi names, or Wi-Fi passwords.
  • It keeps one IPv4 address. An adapter with several keeps only one in the backup.
  • The MAC address is there for reference. A restore does not change the target adapter's MAC address.
  • The right-click menu also offers Backup Settings... and Restore Settings... for Ethernet and Wi-Fi adapters.
  • The restore list holds every network adapter Windows reports, including Wi-Fi and disabled ones, on Windows in any language.
  • To move network settings along with a whole user profile, see the profile backup guide below.