To make a Windows install USB, use the Image Flasher tab in S.A.K. Utility: click Select Image File, choose a Windows ISO, click Next, pick one USB drive, and click Flash!. The app looks inside the ISO, finds the Windows install image, and copies its files to a FAT32 drive instead of writing the image raw.
The USB has one FAT32 partition on an MBR disk, which UEFI firmware reads, so it starts Windows 11 PCs with Secure Boot as well as older BIOS PCs. FAT32 holds no file of 4 GB or more, so a larger
install.wimis split intoinstall.swmparts with Windows' own DISM tool; Windows Setup reads them as they are. On a drive larger than 32 GB the partition is 32 GB.
When to use this
Use this to reinstall or repair Windows from a USB drive. If a PC still will not start from it, see If the PC will not boot it.
What you need
- A Windows ISO. See get a Windows ISO.
- One USB drive you can erase, more than twice the size of the ISO. A 6 GB ISO needs a drive larger than 12 GB. A drive under that is refused before anything is erased.
- Administrator rights. Click Run as Admin first. If you wait, Flash! offers to restart the app, and you then select the ISO and drive again.
- A reasonably fast drive. Copying the files has a 15-minute limit, and a very slow USB stick can hit it.
Steps
Plug in the USB drive, and copy off anything you want to keep.
Click Run as Admin in the status bar, and approve the Windows prompt.
Open the Image Flasher tab.
Click Select Image File and choose the ISO.
Check Image Details. The OS row should name Windows.
Boot Type describes the ISO, not the USB you are about to make Click Next.
Click one drive in the list. A Windows ISO can only go to one drive at a time.
Click Flash!.
Read the confirmation box. The Method line must say Extract ISO to a FAT32 drive.
This Method line tells you the app is treating the ISO as a Windows installer Click Yes.
Wait on Step 3: Flashing... while it moves through Step 1/3, Step 2/3, and Step 3/3. Watch the progress bar in the status bar.
Formatting, extracting, then checking When Flash Complete appears, remove the drive.
How it works
- Step 1: the app wipes the drive with Windows' DiskPart tool, creates one partition marked active (the flag older BIOS PCs boot from), 32 GB at most, and formats it as FAT32, which UEFI firmware reads. It waits up to three minutes for Windows to see the new partition, showing Waiting for Windows to recognize the new partition... with the seconds counted. If it never appears, nothing is formatted, and the message says to unplug the drive, plug it in again, and run the flash again. If Windows gives the new volume no drive letter by itself, which happens when automatic mounting is off and to some USB drives Windows treats as fixed, the app assigns one.
- Step 2: it extracts the ISO to the drive with a bundled copy of 7-Zip, then gives the drive the ISO's volume label, cut to the 11 characters FAT32 keeps. An
install.wimof 4 GB or more is left out of that and taken into a work folder on your PC (it needs about twice the ISO's size free), where DISM splits it into 3800 MB parts that are copied to the drive. Aninstall.esdthat large cannot be split, and the app stops. - Step 3: it confirms that the drive is FAT32, that
setup.exe,bootmgr,sources\boot.wim,efi\boot\bootx64.efi, and an install image are present, that their sizes match the ISO, that eachinstall.swmpart reads back with the hash it was written with, and that the partition is active. The parts are read from the drive itself, not from the copy Windows still holds in memory, so the check takes about as long as the drive takes to read them.
The app decides an ISO is a Windows installer by looking inside it for sources\install.wim, install.esd, or install.swm, which is the file this method needs. The label and the file name do not count.
If the PC will not boot it
The app's checks read the drive back. They do not prove that a given PC starts from it.
- Open the PC's boot menu and look for the USB drive, listed as a UEFI entry. If Secure Boot refuses it, check that the PC trusts Microsoft's own keys, which every Windows PC ships with.
- An older PC without UEFI starts it from its active partition in legacy BIOS mode.
- Otherwise, make the USB with Microsoft's Media Creation Tool instead.
Good to know
This erases the entire drive, and it cannot be undone.
- Settings that do not apply: Validation mode, Buffer size, and Max concurrent writes only affect raw image writes. Unmount drives on completion, desktop notifications, and the large drive warning do apply. See Image Flasher settings.
- The check is not byte for byte: the app compares the key files' sizes, not their contents. Only the parts of a split
install.swmare read back and checked by hash. - Rescue discs: an ISO with no install image inside, such as a Windows-based rescue disc, is written raw like any other image, and the Method line says so. A disc like that may not boot from a USB drive written this way.
- Could Not Read Image: the app could not look inside the file, so it stops before changing anything. The bundled 7-Zip tool may be missing from the app's folder; extract a fresh copy of the app.
- Several drives selected: the app stops with a Flash Error saying select a single drive, and nothing is written.
- Cancel or failure: the red Cancel on Step 3: Flashing... works while files are copied and while the app waits for Windows to see the new partition. After it, Flash Cancelled says whether the USB was touched. A half-made USB will not work until you run this again or format it.