Stress test a PC's CPU, memory, disk, and GPU

Run a timed stress test on CPU, memory, disk, and GPU with S.A.K. Utility to find crashes, errors, and overheating, with a CPU temperature limit.

To stress test a PC, use the Benchmark and Diagnostics tab in S.A.K. Utility: on the Benchmarks sub-tab, go to Stress Testing, tick the parts to test, set a duration, and click Start Stress Test. It runs those parts flat out and ends with Status: PASSED or Status: FAILED, or Status: STOPPED when you stop it first.

When to use this

Use this to track down random crashes or freezes, to check a repaired or second-hand PC, or to confirm that cooling copes under load.

What you need

  • Administrator rights, so the temperature limit can work. The test runs without them, but the app then usually has no CPU temperature to watch. Click Run as Admin first.
  • For a disk test, a filled Drive: list. Click Scan Hardware on the Diagnostics sub-tab first.
  • A laptop plugged into power, and good airflow around the PC.

Steps

  1. Click Run as Admin in the status bar, and approve the Windows prompt.

  2. Open the Benchmark and Diagnostics tab.

  3. Click the Benchmarks sub-tab.

  4. If you will test the disk, choose the drive under Drive: in Disk I/O Benchmark.

  5. In Stress Testing, tick the Components: to test: CPU, Memory, Disk, or GPU. CPU and Memory start ticked.

  6. Set Duration (min), from 1 to 1440 minutes. It starts at 10.

  7. Set Thermal Limit, from 60 to 110 degrees Celsius. It starts at 95.

    Stress Testing group with CPU and Memory ticked, a 10 minute duration, a thermal limit of 95, and Status: Not Running
    Start with the defaults
  8. Click Start Stress Test.

  9. Watch Elapsed, CPU Temp, and Errors. They update every 5 seconds, and Elapsed shows the run's whole length when it ends.

    Stress Testing group during a run with Status: Running and live elapsed time, CPU temperature, and error count
    Check that CPU Temp shows a real number
  10. Wait for the result, or click Stop Stress Test to end early. The run ends within a second or two of its duration, and Stop Stress Test ends it within a few seconds.

    Stress Testing group showing Status: PASSED after the run finished
    PASSED means no errors and no thermal stop

How it works

  • CPU: every logical processor runs heavy math continuously.
  • Memory: the app takes 80 percent of the available memory, with a limit of 16 GB, fills it with a known pattern, reads it back, and repeats. A mismatch can point to faulty memory.
  • Disk: the app repeatedly writes a 256 MB temporary file and forces it onto the disk. On the Windows drive the file goes in your temp folder, and on any other drive in its top folder. Windows removes the file when the test ends.
  • GPU: the graphics card runs a compute workload through DirectX 11.

Every 5 seconds the app reads the CPU temperature. A slow reading never holds up the run or its end. The PC is kept awake during the run.

Reading the result

  • Status: PASSED: the run reached the full duration with no errors.
  • Status: FAILED with Thermal limit exceeded: the CPU reached your limit, so the app stopped the test. Check fans, airflow, and thermal paste.
  • Status: FAILED with an error count: the app stops soon after the first error. Memory pattern errors can mean faulty memory. A disk or GPU error can also mean the test could not start on that part, such as when no DirectX 11 graphics card is available.
  • Status: STOPPED with Cancelled by user: you stopped it yourself, with Stop or by closing the app. This says nothing about the hardware either way. Elapsed shows how long it ran.

Good to know

A stress test pushes hardware hard on purpose and can expose a fault by crashing the PC. Save your work, and back up anything important first.

  • Check the CPU Temp reading. If it says no reading - the thermal limit is not being enforced, the app cannot read a temperature, and the Thermal Limit cannot protect the PC. The test keeps running anyway, and the exported report says so too. Run as administrator, or watch temperatures with another tool.
  • The limit covers the CPU only. The GPU and disk are not watched, even when they are being tested.
  • The limit stops the test. When the CPU reaches it, the run ends and reports FAILED.
  • Memory use: the PC will feel slow while the memory test runs.
  • Disk wear: the disk test writes continuously, which wears an SSD. Keep the duration short on drives you care about.
  • Disk file on another drive: Windows may only let administrators create files in the top folder of some drives. If the test cannot start there, run as administrator.
  • Saving results: to keep the result, export a Scan Report.