Read Mac and Linux disks on Windows

Browse APFS, HFS+, and ext4 disks on Windows and copy files off them with S.A.K. Utility, with no driver, no mounting, and nothing written to the disk.

To read a Mac or Linux disk on Windows without installing a driver, use Partition Manager in S.A.K. Utility: open the Partition Manager tab, press Scan Disks, select the partition, and click Browse Non-Windows File System. It lists folders on APFS, HFS+, HFSX, ext2, ext3, and ext4 partitions, and copies files to Windows. Browsing writes nothing to the disk.

When to use this

  • You have a drive from a Mac or a Linux PC and need files from it on a Windows PC.
  • You want to know what a partition holds before you reuse it.

S.A.K. does not give the disk a drive letter, and it does not appear in Windows File Explorer here. You work inside these windows.

What you need

  • The disk connected to the PC.
  • Administrator rights to read it. Press Run as Admin in the status bar first, because Windows only lets administrators read a partition directly. Without them, browsing stops with a message that begins Unable to open.
  • Somewhere on Windows to save the files.

Steps

Browse and copy files

  1. Press Scan Disks. Check the File System column to find your partition.

  2. Select the partition and click Browse Non-Windows File System.

  3. Leave Target: as it is. Leave Path: as / to start at the top, or type a folder such as /Users/sample. Press Browse.

    The Browse Non-Windows File System window with Target and Path boxes and a Browse button
    Type the folder you want to list
  4. Read the list. The columns depend on the file system. All of them show the name, type, size, and path.

    The Browse ext4 File System window listing sample files with type, size, inode, and path, and buttons to copy, extract, and export
    Browsing an ext4 partition
  5. To copy one file, select it and press Extract Selected.

  6. To copy the folder you are viewing and what is inside it, press Export Directory and choose a destination.

  7. To save the list as text, press Copy Listing.

  8. Press Close. To view another folder, click Browse Non-Windows File System again and type its path. Double-clicking a folder does not open it.

HFS+ and HFSX add Extract Resource Fork and Extract Attribute for the extra data Mac files can carry.

The Browse HFS+ File System window with data size, resource size, and catalog ID columns, and extra extract buttons
Browsing an HFS+ partition
The Browse APFS File System window with the volume name above a list of sample files, and buttons to copy, extract, and export
Browsing an APFS partition

See what a partition is

Select the partition and click Inspect Non-Windows File System. This shows what the last disk scan learned: the file system, its details, and what S.A.K. can do with it. It also works for XFS, Btrfs, and Linux swap. Copy Details copies the list.

The Inspect ext4 File System window listing the disk, partition, raw target path, file system, how it was detected, and read-only metadata, with more rows further down
Inspect shows what the last scan found

Check a partition for errors

  1. Select the partition and click Check Non-Windows File System.

  2. If a Mode: list appears, choose one. Check Target path:, and press the button. It reads Check Now for a check, which runs at once, and Add to Queue for a repair:

    • Read-only check now runs a bundled checker on ext or HFS+. When it ends, a window titled Check Non-Windows File System says what it found, such as The ext4 file system: No errors found (read-only e2fsck). Turn on the Log switch for the checker's own report.
    • Original HFS+ catalog check now runs S.A.K.'s own read-only check of an HFS+ folder structure and shows the counts. Its Result row reads No errors found (read-only catalog check) when the structure is sound.
    • Queue ext repair, Queue HFS+ repair, and Queue generated APFS repair add a repair to the queue, and need the confirmation box checked. They write to the disk when you press Apply.
  3. On XFS and Btrfs, and on an APFS container S.A.K. cannot repair, no list appears. You see the results from the last disk scan instead, in a window titled with the file system's name, such as XFS Metadata (Last Disk Scan). Its Result row reads No errors found (read-only, in the metadata the last disk scan read) when nothing is wrong. Refresh Disks recomputes them. For APFS, a Repair row says why no repair is offered.

The Check Non-Windows File System window with a Mode list, a Target path box, and a repair confirmation
Run a read-only check now, or queue a repair for Apply
A properties window titled XFS Metadata (Last Disk Scan), with a Result row reading No errors found (read-only, in the metadata the last disk scan read) and a Findings row
For some file systems, the check shows results from the last scan
The APFS Metadata (Last Disk Scan) window, with a Repair row saying S.A.K. can repair only APFS containers it formatted itself, up to 128.0 MB, and that this 1.00 GB container gets only the read-only metadata check
For APFS, the Repair row says why no repair is offered

APFS Container

  1. Select an APFS partition and click APFS Container.
  2. Set Action: to Create snapshot, Delete snapshot, Revert to snapshot, or Resize container to fill partition.
  3. For a snapshot action, enter Name:.
  4. Check the confirmation box and press Add to Queue. This writes to the disk when you press Apply.
The APFS Container window with an Action list, a Name box, and a confirmation checkbox
APFS Container actions wait for Apply

S.A.K. Utility can create, change, rename and delete files and folders on APFS containers created by macOS, on a raw partition or disk image, through a crash-safe in-place copy-on-write engine. Separately, on earlier code (June to August 2026), S.A.K.'s HFS+ and APFS write engine was validated with Apple's own tools. It refuses Fusion and multi-device containers, sealed system volumes, case-sensitive volumes, and encrypted volumes without their password or recovery key.

How it works

S.A.K. has its own code for reading these file systems, so Windows needs no driver and nothing is mounted. It reads the partition directly, in read-only mode, works out the folder structure, and copies the bytes you ask for.

To change a Mac or Linux disk, use the queue like any other Partition Manager change. You can format a partition as ext, HFS+, APFS, or Linux swap, resize ext partitions, and grow APFS partitions.

Good to know

Back up first if you change anything. Browsing, inspecting, and read-only checks do not write to the disk. Repairs and APFS Container actions do, and they cannot be undone. Separately, on earlier code (June to August 2026), S.A.K.'s HFS+ and APFS write engine was validated with Apple's own tools. Back up before changing a disk.

  • Encrypted disks cannot be read here. The browse window has no place for a password, so a FileVault volume stops with APFS volume is encrypted; a password or recovery key is required. Encrypted ext volumes are not supported either.
  • XFS and Btrfs are detect-only. S.A.K. recognizes them and shows their details, but cannot list their files. S.A.K. Utility includes no XFS or Btrfs tools, so it cannot format, repair, or deep-check them either; it runs only its own read-only metadata check. Linux swap holds no files to browse.
  • Some ext volumes are refused if they use less common features such as compression, inline data, or bigalloc. The message names the feature.
  • Size limits. A listing shows up to 1,000 entries per folder. Extract Selected handles a file up to 512 MB. Export Directory handles up to 10,000 entries and 4 GB in total.
  • APFS repair is limited. Queue generated APFS repair appears only for a container S.A.K. formatted itself, up to 128.0 MB. Any other APFS container gets the read-only metadata check, and the window says why. It starts S.A.K. can repair only APFS containers it formatted itself, up to 128.0 MB., then gives the reason, such as This container was formatted by something else (a Mac, for example), so only the read-only metadata check is offered.
  • Repairs are refused on system, boot, EFI, MSR, recovery, and read-only partitions.